This JST SM three wire inline connector set ships with both the male and female side of the connector pre assembled with 80mm leads. The wires are rated to 300V 22AWG and will handle a couple amps. Since this is typically used as a battery connector or sensor connector, it is keyed to prevent it from being reverse inserted. There is also a locking tab to prevent the connection from being pulled apart accidentally... [Read More]

Add WiFi, Bluetooth and Bluetooth LE to your next project with this small, yet powerful ESP32 SMT Module. The ESP32 processor from Espressif is a much more powerful WiFi enabled microcontroller than the ESP8266, well suited for applications like low-power sensor networks to the most demanding tasks such as voice encoding, music streaming and MP3 decoding. This product is recommended for advanced users only. This is just the module - which can be difficult to use. You'll need to solder it onto a board with supporting circuitry. . ... [Read More]

This GT2 timing pulley is a bit interesting – it has two separate pullies for two separate GT2 belts. Synchronously drive two separate shafts in different locations, use it to couple two belts together to make a tight bend, or whatever creative use you come up with. The pulley has 20 teeth and a 6.35mm (1/4") bore. Use with all forms of 6mm wide GT2 belt we carry in stock. ... [Read More]

This basic panel mount pushbutton is designed to fit in a 12mm hole. Is normally open, meaning that when it is pressed the contacts are shorted closed. The button includes a nut and washer required for panel mounting - all you have to do is drill the hole. . ... [Read More]

This basic panel mount pushbutton is designed to fit in a 12mm hole. Is normally open, meaning that when it is pressed the contacts are shorted closed. The button includes a nut and washer required for panel mounting - all you have to do is drill the hole. . ... [Read More]

This basic panel mount pushbutton is designed to fit in a 12mm hole. Is normally open, meaning that when it is pressed the contacts are shorted closed. The button includes a nut and washer required for panel mounting - all you have to do is drill the hole. . ... [Read More]

This basic panel mount pushbutton is designed to fit in a 12mm hole. Is normally open, meaning that when it is pressed the contacts are shorted closed. The button includes a nut and washer required for panel mounting - all you have to do is drill the hole. . ... [Read More]

This basic panel mount pushbutton is designed to fit in a 12mm hole. Is normally open, meaning that when it is pressed the contacts are shorted closed. The button includes a nut and washer required for panel mounting - all you have to do is drill the hole. . ... [Read More]

Tactile Switch – Large

  This week we have Tactile Switch – Large featured as our Product of the Week. This item is on sale for 60% OFF until Friday at midnight Pacific time - so do not miss out!