BC Robotics

2021 Holiday Gift Guide – Gifts Under $25

2021 Holiday Gift Guide – Gifts Under $25

Raspberry Pi Pico

Raspberry Pi Pico

$8.95

Availability: In Stock

The Raspberry Pi Pico is the first microcontroller developed by the Raspberry Pi Foundation. It features their own in-house designed chip, the RP2040. It is a low-cost, high performance controller designed with Python in mind. It is easy to use and features a full getting started guide care of the Pi Foundation.

Available

SKU: RAS-200 Manufacturer: Raspberry Pi Foundation Category: Tags: , , , , , ,

Description

The Raspberry Pi Pico is a low-cost, high-performance microcontroller board with flexible digital interfaces. It features the RP2040 which marks Raspberry Pi’s first microcontroller designed in-house. Pico provides minimal (yet flexible) external circuitry to support the RP2040 chip (Flash, crystal, power supplies and decoupling and USB connector). The majority of the RP2040 microcontroller pins are brought to the user IO pins on the left and right edge of the board. Four RP2040 IO are used for internal functions – driving an LED, on-board Switched Mode Power Supply (SMPS) power control and sensing the system voltages.

Pico uses an on-board buck-boost SMPS which is able to generate the required 3.3 volts (to power RP2040 and external circuitry) from a wide range of input voltages (~1.8 to 5.5V). This allows significant flexibility in powering the unit from various sources such as a single Lithium-Ion cell, or 3 AA cells in series. Battery chargers can also be very easily integrated with the Pico powerchain. Reprogramming the Pico’s flash memory can be done using USB (simply drag and drop a file onto the Pico which appears as a mass storage device) or via the Serial Wire Debug (SWD) port. The SWD port can also be used to interactively debug code running on the RP2040

Pico has been designed to use either soldered 0.1″ pin-headers (it is one 0.1″ pitch wider than a standard 40-pin DIP package) or can be used as a surface mountable “module”, as the user IO pins are also castellated. There are SMT pads underneath the USB connector and BOOTSEL button, which allow these signals to be accessed if used as a reflow-soldered SMT module.

Features

  • RP2040 microcontroller chip designed by Raspberry Pi
  • Flexible clock running up to 133 MHz
  • 264kB of SRAM
  • Low-power sleep and dormant modes
  • 26 multi-function GPIO pins
  • 16 x PWM Outputs
  • Accurate clock and timer on-chip
  • Accelerated floating point libraries on-chip
  • Dual-core ARM Cortex M0+ processor
  • 2MB of on-board Flash memory
  • USB 1.1 Host and Device support
  • Drag & drop programming using mass storage over USB
  • 3 x 12-bit Analog Input
  • 2× SPI, 2× I2C, 2× UART
  • Temperature sensor
  • 8 × Programmable IO (PIO) state machines for custom peripheral support

Package Contents

  • 1 x Raspberry Pi Pico

May We Also Suggest…

1.5′ USB A Male to Micro Cable
Price: $4.95
 
40 Pin Breakaway Male Header – Standard
Price: $0.95
 
40 Pin Breakaway Male Header – White
Price: $0.95
 
Raspberry Pi Pico 1591B Proto Board
Price: $4.95
 
Raspberry Pi Pico Female Headers
Price: $1.95
 
USB A to Micro – 3ft
Price: $4.95
 

   

  Difficulty Level

Soldering Skill: Beginner
Prototyping Skill: Beginner
Programming Skill: Beginner

  Product Certifications

  Product Attributes

Weight: 8 g
Shipping Dimensions: 72 × 29 × 6 mm
PWM Outputs:

16

Input Voltage:

1.8 to 5.5 VDC

Logic Voltage:

3.3V

Pitch:

0.100", 2.54mm

Length:

52.5mm

Width:

21mm

Height:

3.7mm

  Warranty Policy

This product has a 30 Day Warranty from the date of delivery. The item must not be modified, abused, incorrectly hooked up, or used for purposes outside the original scope of design.

  Return Policy

This product is returnable Within 14 Days of delivery for a store credit. Item must be unopened, unused, and in re-saleable condition.

 
More Information:
For more information on our Warranty and Return Policies, please consult our   Terms of Service
 

Comments

There are no comments yet.

Be the first to comment on “Raspberry Pi Pico”

Your email address will not be published. Required fields are marked *

 Suggested Additions:

Mini Drill Bit Set - 0.3mm to 1.2mm

Mini Drill Bit Set – 0.3mm to 1.2mm

$9.95

Availability: In Stock

Small drill bits are a great thing to have at any work bench. This set of 10 tiny bits range from 0.3mm to 1.2mm in 0.1mm increments. Each carbide bit has a 1/8” (3.175mm) shank which should work with a variety of rotary and hand tools.

Available

SKU: TOL-068 Categories: , Tags: ,

Description

This 10-piece carbide micro drill bit set is the perfect addition to your toolkit for precise drilling and intricate work in electronics, PCBs, jewelry, model building, and other fine-detail applications. The set includes 10 high-quality drill bits, starting from 0.3mm and increasing in 0.1mm increments up to 1.2mm.

Each drill bit features a durable carbide construction, ensuring longevity and excellent performance, even under demanding conditions. The 1/8″ (3.175mm) shank is designed to fit securely into standard rotary tool collets or chucks, providing stability and reducing the risk of slipping during operation.

These small, yet robust, drill bits are ideal for working with delicate materials such as circuit boards, plastics, woods, and soft metals, while maintaining accuracy and minimizing the risk of damage.

 

Features

  • Set of 10 carbide bits
  • 1/8˝ (3.175mm) shank
  • Handy carrying case
  • 0.3mm to 1.2mm in 0.1mm increments

Package Contents

  • 1 x Mini Drill Bit 0.3mm
  • 1 x Mini Drill Bit 0.4mm
  • 1 x Mini Drill Bit 0.5mm
  • 1 x Mini Drill Bit 0.6mm
  • 1 x Mini Drill Bit 0.7mm
  • 1 x Mini Drill Bit 0.8mm
  • 1 x Mini Drill Bit 0.9mm
  • 1 x Mini Drill Bit 1.0mm
  • 1 x Mini Drill Bit 1.1mm
  • 1 x Mini Drill Bit 1.2mm

May We Also Suggest…

Mini Drill Bit Set – 0.1mm to 1.0mm
Price: $9.95
 
Mini Drill Bit Set – 1.1mm to 2.0mm
Price: $12.95
 

   

  Difficulty Level

Soldering Skill: N/A
Prototyping Skill: N/A
Programming Skill: N/A

  Product Certifications

  Product Attributes

Weight: 50 g

  Warranty Policy

This product has a 30 Day Warranty from the date of delivery. The item must not be modified, abused, incorrectly hooked up, or used for purposes outside the original scope of design.

  Return Policy

This product is returnable Within 14 Days of delivery for a store credit. Item must be unopened, unused, and in re-saleable condition.

 
More Information:
For more information on our Warranty and Return Policies, please consult our   Terms of Service
 

Comments

There are no comments yet.

Be the first to comment on “Mini Drill Bit Set – 0.3mm to 1.2mm”

Your email address will not be published. Required fields are marked *

SparkFun Heaterizer XL-3000

SparkFun Heaterizer XL-3000

$24.95

Brand:

  • SparkFun
Availability: Low Stock - Only 2 Remaining

The SparkFun Heaterizer XL-3000 heat gun is a handy tool that everyone should have. The nozzle temperature is ~ 250℃ so it’s great for heat-shrink, melting things, and even very basic low temp rework. The size is great for a lot of different applications and it heats up pretty quickly.

Available

SKU: TOL-028 Manufacturer: Sparkfun Mfg Part Number: TOL-10326 Category: Tag:

Description

DescriptionThe SparkFun Heaterizer XL-3000 heat gun is a handy tool that everyone should have. The nozzle temperature is ~ 250℃ so it’s great for heat-shrink, melting things, and even very basic low temp rework. The size is great for a lot of different applications and it heats up pretty quickly.

Features

  • 300 watts of heating power
  • Nozzle Temperature: 250℃
  • 110v operation only
  • Flip-out stand

Package Contents

  • 1 x SparkFun Heaterizer XL-3000

May We Also Suggest…

1/4″ Heat Shrink Tubing – 4′
Price: $5.50
 
127 Piece Black Heat Shrink Kit
Price: $11.95
 
385 Piece Heat Shrink Kit
Price: $17.95
 
Insulated Silicone Soldering & Rework Mat
Price: $17.95
 
Insulated Silicone Soldering Mat
Price: $14.95
 

   

  Difficulty Level

Soldering Skill: N/A
Prototyping Skill: N/A
Programming Skill: N/A

  Product Certifications

  Product Attributes

Weight: 356 g

  Warranty Policy

This product has a 30 Day Warranty from the date of delivery. The item must not be modified, abused, incorrectly hooked up, or used for purposes outside the original scope of design.

  Return Policy

This product is returnable Within 14 Days of delivery for a store credit. Item must be unopened, unused, and in re-saleable condition.

 
More Information:
For more information on our Warranty and Return Policies, please consult our   Terms of Service
 

Comments

There are no comments yet.

Be the first to comment on “SparkFun Heaterizer XL-3000”

Your email address will not be published. Required fields are marked *

 Suggested Additions:

Third Hand With Magnifying Glass

Third Hand With Magnifying Glass

$10.95

Availability: In Stock

The third hand is an essential workbench accessory. Whether you are building models, soldering wires, or assembling electronics – this tool keeps everything held in place, leaving your hands free to solder, glue, inspect, etc.

Available

SKU: TOL-007 Manufacturer: Categories: , Tags: ,

Description

The third hand is an essential workbench accessory. Whether you are building models, soldering wires, or assembling electronics – this tool keeps everything held in place, leaving your hands free to solder, glue, inspect, etc.

The third hand has two position-able “alligator clip” grippers that can be moved and set using the thumbscrews and wing nuts. There is also a magnifying glass that can be positioned to help see those tiny components and details!

If you are working with sensitive parts, or soft items that may be damaged by the alligator grippers, we recommend throwing a little heat shrink tubing over the claws – this will take some of the bite out of the metal, but still maintain a good grip!

Features

  • 2 Alligator Clips
  • Heavy cast iron base to keep it upright
  • Magnifying glass

Package Contents

  • 1 x Third Hand With Magnifying Glass

May We Also Suggest…

Deluxe Metal PCB Work Station
Price: $47.95
 
Insulated Silicone Soldering Mat
Price: $14.95
 
Magnetic Parts Tray
Price: $3.95
 
Solder Wire Holder Stand – TJ-227
Price: $13.95
 
SparkFun Third Hand Kit
Price: $49.95
 
Techspray #2 Solder Wick
Price: $8.95
 

   

  Difficulty Level

Soldering Skill: N/A
Prototyping Skill: N/A
Programming Skill: N/A

  Product Certifications

  Product Attributes

Weight: 403 g

  Warranty Policy

This product has a 30 Day Warranty from the date of delivery. The item must not be modified, abused, incorrectly hooked up, or used for purposes outside the original scope of design.

  Return Policy

This product is returnable Within 14 Days of delivery for a store credit. Item must be unopened, unused, and in re-saleable condition.

 
More Information:
For more information on our Warranty and Return Policies, please consult our   Terms of Service
 

Comments

There are no comments yet.

Be the first to comment on “Third Hand With Magnifying Glass”

Your email address will not be published. Required fields are marked *

ELM327 Bluetooth OBD2 Dongle

ELM327 Bluetooth OBD2 Dongle

$13.95

Availability: Temporarily Out Of Stock

This ELM327 Bluetooth OBD2 Dongle is a popular and easy way to read codes from OBD2 compliant systems. Simply plug this into the OBD2 Port in your car / truck and, if your vehicle is OBD2 compliant, this device will be able to act as an interface between your vehicle and your mobile phone or Bluetooth capable Arduino / Raspberry Pi / etc.

Out of Stock - Available on Backorder

Want to be notified when this product is back in stock?

SKU: OTH-061 Mfg Part Number: ELM 327 Category: Tags: ,

Description

This ELM327 Bluetooth OBD2 Dongle is a popular and easy way to read codes from OBD2 compliant systems. Simply plug this into the OBD2 Port in your car / truck and, if your vehicle is OBD2 compliant, this device will be able to act as an interface between your vehicle and your mobile phone or Bluetooth capable Arduino / Raspberry Pi / etc. Depending on the vehicle, a variety of options can be obtained including basic OBD2 diagnostic information, live data, and fault codes.

Please Note: An ELM327 compliant app is required on your mobile phone to connect to the device. There are a variety of freeware and payware options available on the Google Play Store (Android) and App Store (Apple). When using Arduino a Bluetooth module is also required.

Features

  • ELM327 Based OBDII Reader
  • Perfect for Arduino / Raspberry Pi Projects
  • Apple and Android Compatible

Package Contents

  • 1 x ELM327 Bluetooth OBD2 Dongle

May We Also Suggest…

CAN-BUS Shield
Price: $38.00
 
OBD-II to DB9 Cable
Price: $15.95
 
SparkFun AST-CAN485 Dev Board
Price: $79.95
 

   

  Difficulty Level

Soldering Skill: N/A
Prototyping Skill: N/A
Programming Skill: N/A

  Product Certifications

  Product Attributes

Weight: 30 g

  Warranty Policy

This product has a 30 Day Warranty from the date of delivery. The item must not be modified, abused, incorrectly hooked up, or used for purposes outside the original scope of design.

  Return Policy

This product is returnable Within 14 Days of delivery for a store credit. Item must be unopened, unused, and in re-saleable condition.

 
More Information:
For more information on our Warranty and Return Policies, please consult our   Terms of Service
 

Comments

There are no comments yet.

Be the first to comment on “ELM327 Bluetooth OBD2 Dongle”

Your email address will not be published. Required fields are marked *

Basic Electronic Components Kit

Basic Electronic Components Kit

$27.95

Availability: In Stock

This 1400 piece kit is perfect for beginners looking to expand their collection of basic electronic components. These are not industry grade components, but they are more than adequate for experimenting, learning, and prototyping with.

Available

SKU: KIT-043 Categories: , , Tags: , ,

Description

This 1400 piece kit is perfect for beginners looking to expand their collection of basic electronic components. These are not industry grade components, but they are more than adequate for experimenting, learning, and prototyping with. The kit includes 600 Resistors (30 values, 20pcs each), 100 Diodes (5 different types), 100 LEDs (3mm, 5 colors), 120 Electrolytic Capacitors (12 values, 10pcs each), 180 Transistors (18 types, 10pcs each), 300 Ceramic Capacitors (30 types, 10pcs each), and a Plastic 36 Compartment Storage Box.

The Electrolytic Capacitors, Ceramic Capacitors, and Transistors are all packaged by value (to keep things organized) and the Resistors are stamped with their value on the cut tape.

Features

  • 1400 Piece Kit
  • 600 Resistors (30 Values, 20pcs)
  • 100 LEDs (5 Colors, 20pcs)
  • 300 Ceramic Capacitors (30 Values, 10pcs)
  • 180 Transistors (18 Values, 10pcs)
  • Includes Divided Storage Box
  • 100 Diodes (5 Different Types)
  • 120 Electrolytic Capacitors (12 Values, 10pcs)

Package Contents

  • Resistor Values: 10, 22, 47, 100, 150, 200, 220, 270, 330, 470, 510, 680, 1k, 2k, 2k2, 3k3, 4k7, 5k1, 6k8, 10k, 20k, 47k, 51k, 68k, 100k, 220k, 300k, 470k, 680k, 1M
  • Diodes: 1N5822 (10), 1N4007 (25) , 1n4148 (25), IN5399 (20), FR107 (20)
  • Electrolytic Capacitors: 0.22uF 50V, 0.47uF 50V, 1uF 50V, 2.2uF 50V, 4.7uF 50V, 10uF 25V, 22uF 16V, 33uF 16V, 47uF 16V, 100uF 16V, 220uF 16V, 470uF 16V
  • Transistors: S8050, S8550, S9012, S9013, S9014, S9015, S9018, C945, C1815, A42, A92, A773, A1015, 2N5401, 2N3904, 2N3906, 2N2222A, 2N5551
  • Ceramic Capacitors: 2pf, 3pf, 5pf, 10pf, 15pf, 22pf, 30pf, 33pf, 47pf, 50pf, 68pf, 75pf, 82pf, 100pF, 150pf, 220pf, 330pF, 470pF, 680nF, 1nF, 1.5nF, 2.2nF, 3.3nF, 4.7nF, 6.8nF, 10nF, 15nF,22nF, 47nF, 68nF, 100nF

May We Also Suggest…

37 Assorted Sensor Kit For Arduino
Price: $29.95
 
Basic Parts Kit – 250pcs
Price: $11.95
 
Breadboard Friendly Jumper Wire Kit – 140 pcs
Price: $5.95
 
Premium Male/Male Jumper Wires – 6″
Price: $4.95
 
Solderless Breadboard – Large
Price: $6.95
 
Solderless Breadboard – XL
Price: $14.95
 

   

  Difficulty Level

Soldering Skill: N/A
Prototyping Skill: Beginner
Programming Skill: N/A

  Product Certifications

  Product Attributes

Weight: 445 g

  Warranty Policy

This product has a 30 Day Warranty from the date of delivery. The item must not be modified, abused, incorrectly hooked up, or used for purposes outside the original scope of design.

  Return Policy

This product is Final Sale and cannot be returned once purchased. 

More Information:
For more information on our Warranty and Return Policies, please consult our   Terms of Service
 

Comments

There are no comments yet.

Be the first to comment on “Basic Electronic Components Kit”

Your email address will not be published. Required fields are marked *

Pro's Kit Repair Kit - 17 Pcs

Pro’s Kit Repair Kit – 17 Pcs

$12.00

Availability: In Stock - Available While Quantities Last

This 17 in 1 Tool Kit is designed primarily for disassembling Apple products, however, we think this comes in handy for a lot of other hardware hacking and repairing. The kit contains a comfortable screwdriver with 13 different interchangeable bits, three types of plastic prying tool, and a suction cup.

Available

SKU: TOL-119 Manufacturer: Pro's Kit Mfg Part Number: SD-9314 Categories: , Tags: ,

Description

This 17 in 1 Tool Kit is designed primarily for disassembling Apple products, however, we think this comes in handy for a lot of other hardware hacking and repairing. The kit contains a comfortable screwdriver with 13 different interchangeable bits, three types of plastic prying tool, and a suction cup.

The kit has 12 screwdriver bits (P2, PH000, H2.0mm, H1.5mm, T4, T5, T6, T8, T10, T15, T20, a 1.5mm Flat) and a needle pin bit (for popping out sim cards, hitting device reset buttons). The T5 is hidden inside the screwdriver handle, just pop the black end cap off to get it out.

The three types of prying tools are used to open cases and enclosures and generally pry at things while reducing the risk of surface damage to whatever you are prying against. These are plastic and shouldn’t be forced too much!

The suction cup is used to help lift screens and generally pull things apart as well, the suction cup measures 36mm in diameter and has a handy pull ring.

All of these tools are stored in a hard plastic case with trays to keep everything in place.

Features

  • 17 tools in one handy carrying case
  • Case Dimensions: 130 x 100 x 30mm

Package Contents

  • 12 x Screwdriver Bits
  • 1 x Flat Prying Paddle
  • 1 x Suction Cup (36mm)
  • 1 x Needle Pin
  • 1 x Precision Screwdriver Handle
  • 2 x Opening Levers
  • 1 x Carrying Case

  Difficulty Level

Soldering Skill: N/A
Prototyping Skill: N/A
Programming Skill: N/A

  Product Certifications

  Product Attributes

Weight: 250 g

  Warranty Policy

This product has a 30 Day Warranty from the date of delivery. The item must not be modified, abused, incorrectly hooked up, or used for purposes outside the original scope of design.

  Return Policy

This product is Final Sale and cannot be returned once purchased. 

More Information:
For more information on our Warranty and Return Policies, please consult our   Terms of Service
 

Comments

There are no comments yet.

Be the first to comment on “Pro’s Kit Repair Kit – 17 Pcs”

Your email address will not be published. Required fields are marked *

385 Piece Heat Shrink Kit

385 Piece Heat Shrink Kit

$17.95

Availability: Out Of Stock

Heat shrink tubing is a favorite method of protecting solder joints, protecting small electronic components, and keeping wires organized. This large kit contains 385 pieces of heat shrink tubing in various colors. The case is segmented carrying case – perfect for throwing in a portable toolkit!

Out Of Stock

Want to be notified when this product is back in stock?

SKU: KIT-046 Manufacturer: Salipt Mfg Part Number: 0769-23131696 Categories: , , Tags: ,

Description

Heat shrink tubing is a favorite method of protecting solder joints, protecting small electronic components, and keeping wires organized. This large kit contains 385 pieces of heat shrink tubing in various colors. The case is segmented carrying case – perfect for throwing in a portable toolkit!

The heat shrink is cut into several different lengths and features a 2:1 shrink ratio. Once it is in place, just use a heat gun to shrink it down!

Included Sizes

  • 1.5mm to 0.75mm
  • 2.0mm to 1.0mm
  • 3.0mm to 1.5mm
  • 4.0mm to 2.0mm
  • 5.0mm to 2.5mm
  • 6.0mm to 3.0mm
  • 8.0mm to 4.0mm
  • 10.0mm to 5.0mm
  • 12.0mm to 6.0mm

 

Features

  • Case Dimensions: 195mm x 140mm x 38mm
  • 2:1 Shrink Ratio
  • 600V Insulation

Package Contents

  • 385 x Assorted Heat Shrink Pieces in 9 different sizes

May We Also Suggest…

1/8″ Heat Shrink Tubing – 4′
Price: $3.75
 
127 Piece Black Heat Shrink Kit
Price: $11.95
 
Heat Shrink Kit – 95 Pieces
Price: $12.95
 
Hot Air Soldering Rework Station – Quick 957DW+
Price: $254.95
 
SparkFun Heaterizer XL-3000
Price: $24.95
 

   

  Difficulty Level

Soldering Skill: N/A
Prototyping Skill: N/A
Programming Skill: N/A

  Product Certifications

  Product Attributes

Weight: 215 g

  Warranty Policy

This product has a 30 Day Warranty from the date of delivery. The item must not be modified, abused, incorrectly hooked up, or used for purposes outside the original scope of design.

  Return Policy

This product is Final Sale and cannot be returned once purchased. 

More Information:
For more information on our Warranty and Return Policies, please consult our   Terms of Service
 

Comments

There are no comments yet.

Be the first to comment on “385 Piece Heat Shrink Kit”

Your email address will not be published. Required fields are marked *

Raspberry Pi 4 Aluminum Case – Black

Raspberry Pi 4 Aluminum Case – Black

$15.95

Availability: Retired

This tough aluminum case is designed to fit the Raspberry Pi 4. The case is comprised of two precision milled aluminum pieces and allows access to all connection points on the Raspberry Pi.

Out Of Stock

SKU: RAS-197

Description

This tough aluminum case is designed to fit the Raspberry Pi 4. The case is comprised of two precision milled aluminum pieces and allows access to all connection points on the Raspberry Pi. It works with all three variations of the Pi 4 and provides a decent amount of cooling through the use of the case as a giant heatsink. The case contacts four key hotspots on the Raspberry Pi by way of thermal pads. All hardware and heat-sink thermal pads are included.

Please Note: Raspberry Pi 4 sold separately.

Features

  • Dimensions: 90.5 x 65 x 34mm
  • Two piece aluminum case
  • Fits Raspberry Pi 4 2GB, 4GB and 8GB variants

Package Contents

  • 1 x Raspberry Pi 4 Aluminum Case - Black
  • 1 x Hardware Set
  • 1 x Allen Key
  • 1 x Thermal Pad Set

  Difficulty Level

Soldering Skill: N/A
Prototyping Skill: N/A
Programming Skill: N/A

  Product Certifications

  Product Attributes

Weight: 225 g

  Warranty Policy

This product has a 30 Day Warranty from the date of delivery. The item must not be modified, abused, incorrectly hooked up, or used for purposes outside the original scope of design.

  Return Policy

This product is Final Sale and cannot be returned once purchased. 

More Information:
For more information on our Warranty and Return Policies, please consult our   Terms of Service
 

Comments

There are no comments yet.

Be the first to comment on “Raspberry Pi 4 Aluminum Case – Black”

Your email address will not be published. Required fields are marked *

Pro's Kit 6 Piece Soldering Aid Kit

Pro’s Kit 6 Piece Soldering Aid Kit

$13.00

Availability: Low Stock - Only 2 Remaining

Sometimes a repair on a circuit board requires a little more than a soldering iron. This tool kit has 6 dual purpose hand tools for prying, pulling, moving, and cleaning components and the board itself.

Available

SKU: TOL-117 Manufacturer: Pro's Kit Mfg Part Number: 1PK-3616 Categories: , , Tags: ,

Description

Sometimes a repair on a circuit board requires a little more than a soldering iron. This tool kit has 6 dual purpose hand tools. There are two types of chip holder, a lever for lifting ICs and capacitors, a fork shaft for bending leads, two types of scraper, a needle edged lifter for flat ICs, a hook for pulling through hole components, a reamer for cleaning out through holes, a knife for cutting traces, and two brushes for cleaning.

Package Contents

  • 2 x Component Holders
  • 1 x Fork Shaft (Lead Bending)
  • 1 x Needle Edged Lifter
  • 1 x Trace Cutting Knife
  • 1 x Reamer
  • 1 x Lever (For ICs / Capacitors)
  • 2 x Scrapers
  • 2 x Cleaning Brush
  • 1 x Component Hook

May We Also Suggest…

Chip Quik No-Clean Flux Pen – 10mL
Price: $15.95
 
Hot Air Soldering Rework Station – Quick 957DW+
Price: $254.95
 
Rosin Flux Paste – 50g
Price: $23.95
 
SparkFun Heaterizer XL-3000
Price: $24.95
 
Techspray #2 Solder Wick
Price: $8.95
 

   

  Difficulty Level

Soldering Skill: N/A
Prototyping Skill: N/A
Programming Skill: N/A

  Product Certifications

  Product Attributes

Weight: 91 g

  Warranty Policy

This product has a 30 Day Warranty from the date of delivery. The item must not be modified, abused, incorrectly hooked up, or used for purposes outside the original scope of design.

  Return Policy

This product is returnable Within 14 Days of delivery for a store credit. Item must be unopened, unused, and in re-saleable condition.

 
More Information:
For more information on our Warranty and Return Policies, please consult our   Terms of Service
 

Comments

There are no comments yet.

Be the first to comment on “Pro’s Kit 6 Piece Soldering Aid Kit”

Your email address will not be published. Required fields are marked *

4WD Robot Chassis – Blue

4WD Robot Chassis – Blue

$19.95

Availability: In Stock

This four wheel robot chassis is perfect for experimenting with four-wheel drive. Each of the wheels is attached to its own motor, meaning you can control each individual wheel speed and direction. The kit is easy to assemble and offers plenty of mounting points for your microcontroller, sensors, and other additions.

Available

SKU: ROB-148 Category: Tags: , ,

Description

This four wheel robot chassis is perfect for experimenting with four-wheel drive. Each of the wheels is attached to its own motor, meaning you can control each individual wheel speed and direction. The kit is easy to assemble and offers plenty of mounting points for your microcontroller, sensors, and other additions.

The laser cut chassis is made of two stacked blue acrylic plates (we have left the protective peel-a-way cover on the material in the photos) For lower profile designs, this flexible chassis can be assembled without the top layer.

Also included in the kit are: four hobby gearmotors with motor mounts and compatible tires, four encoder discs (optical gates sold separately), a 4 x AA battery pack, and an assortment of hardware to hold it all together.

Add your favorite motor drivers and microcontroller and you have the beginnings of your own 4 wheel drive robot!

Features

  • Complete chassis kit - just add motor drivers & microcontroller
  • Height: ~80mm
  • Width:150mm
  • Motor Voltage: 3-6VDC
  • Includes all hardware
  • Length: 255mm

Package Contents

  • 1 x 4WD Robot Chassis Kit - Blue

May We Also Suggest…

IR Analog Distance Sensor (10-80cm)
Price: $11.95
 
IR Analog Distance Sensor (20-150cm)
Price: $14.95
 
IR Analog Distance Sensor (4-30 cm)
Price: $12.95
 
Opto-Interrupter with Mounting Tabs
Price: $1.95
 
Ultrasonic Distance Transducer – HC-SR04
Price: $3.95
 
Ultrasonic Distance Transducer – HY-SRF05
Price: $5.95
 

   

  Difficulty Level

Soldering Skill: Beginner
Prototyping Skill: Beginner
Programming Skill: N/A

  Product Certifications

  Product Attributes

Weight: 500 g

  Warranty Policy

This product has a 30 Day Warranty from the date of delivery. The item must not be modified, abused, incorrectly hooked up, or used for purposes outside the original scope of design.

  Return Policy

This product is returnable Within 14 Days of delivery for a store credit. Item must be unopened, unused, and in re-saleable condition.

 
More Information:
For more information on our Warranty and Return Policies, please consult our   Terms of Service
 

Comments

There are no comments yet.

Be the first to comment on “4WD Robot Chassis – Blue”

Your email address will not be published. Required fields are marked *

 Suggested Additions:

SparkFun Basic Multimeter

SparkFun Basic Multimeter

$23.95

Brand:

  • SparkFun
Availability: Temporarily Out Of Stock

The digital multimeter (DMM) is an essential tool in every electronic enthusiasts arsenal. The SparkFun Digital Multimeter, however, is not your average multimeter, it features a loud continuity sound, current/voltage sense, and quality probes. You can use the multimeter to measure DC and AC voltage, DC current, resistance, continuity, and test diodes.

Out of Stock - Available on Backorder

Want to be notified when this product is back in stock?

SKU: TOL-059 Manufacturer: SparkFun Electronics Mfg Part Number: TOL-12966 Category: Tags: ,

Description

The digital multimeter (DMM) is an essential tool in every electronic enthusiasts arsenal. The SparkFun Digital Multimeter, however, is not your average multimeter, it features a loud continuity sound, current/voltage sense, and quality probes. You can use the multimeter to measure DC and AC voltage, DC current, resistance, continuity, and test diodes. With this version SparkFun has done away with the bright flashy colors that got them into trouble last time and gone with a nice, neutral gray.

This isn’t your expensive, flashy type of multimeter, this is for all those starving students that need to buy their first good, low-cost digital multimeter. This meter doesn’t have the ability to auto-power off, it isn’t capable of auto-ranging, and it won’t be able to measure frequency. However, with this multimeter you WILL be able to measure DC Voltage from 200mV to 600V, AC Voltage from 200V and 600v, DC Current between 200uA to 10A, and Resistance from 0 to 20M Ohm. We even left a meter on to test the battery life – it lasted more than 170 hours (7 days) before the included 9V gave out!

Features

  • DC Voltage - 200mV/2V/20V/200V/600V
  • DC Current - 200uA/20mA/200mA/10A
  • Continuity Buzzer
  • 2x Testing Probes
  • AC Voltage - 200V/600V
  • Resistance - 0 to 20M Ohm
  • Diode Test
  • Battery included

May We Also Suggest…

Banana to Alligator Coax Cable
Price: $8.00
 
Multimeter Probes + Alligator Clips
Price: $13.95
 
Multimeter Probes – Needle Tipped
Price: $7.95
 
Multimeter Probes – Tweezers
Price: $7.95
 
Standard Multimeter Probe Set
Price: $7.00
 

   

  Difficulty Level

Soldering Skill: N/A
Prototyping Skill: Beginner
Programming Skill: N/A

  Product Certifications

  Product Attributes

Weight: 300 g

  Warranty Policy

This product has a 30 Day Warranty from the date of delivery. The item must not be modified, abused, incorrectly hooked up, or used for purposes outside the original scope of design.

  Return Policy

This product is returnable Within 14 Days of delivery for a store credit. Item must be unopened, unused, and in re-saleable condition.

 
More Information:
For more information on our Warranty and Return Policies, please consult our   Terms of Service
 

Comments

There are no comments yet.

Be the first to comment on “SparkFun Basic Multimeter”

Your email address will not be published. Required fields are marked *

 Suggested Additions:

Solderless Breadboard - XL

Solderless Breadboard – XL

$14.95

Availability: In Stock

This breadboard is considered ‘extra large sized’ and is mounted to a metal plate. There are also three binding posts that mount to the plate, allowing for banana plugs or large power wires to be easily connected and tied to the power rails on the breadboard. The breadboard itself features 1660 tie points in 8 interconnected power/ground columns and 126 interconnected rows.

Available

SKU: PROTO-065 Category: Tag:

Description

Solderless breadboards are one of the most useful things out there. Without them, prototyping circuits becomes a lot more cluttered or a lot more permanent! These breadboards feature rows and columns of interconnected sockets. Components can be placed in the breadboard and connected up using hookup wire or jumper wire to test a circuit, changed as necessary, and eventually ported to a more permanent solution once all the bugs are worked out.

This breadboard is considered ‘extra large sized’ and is mounted to a metal plate. There are also three binding posts that mount to the plate, allowing for banana plugs or large power wires to be easily connected and tied to the power rails on the breadboard. The breadboard itself features 1660 tie points in 8 interconnected power/ground columns and 126 interconnected rows. The plate measures 8.50″ x 5.125″ (215mm x 130mm) and the solderless breadboard measures 6.5″ x 4.25″ (166mm x 109mm).

Features

  • 0.100\\\" Pitch
  • 8 columns, 63 rows
  • 1660 Tie points
  • Metal Mounting Plate

Package Contents

  • 1 x Solderless Breadboard - XL

May We Also Suggest…

Breadboard Friendly Jumper Wire Kit – 140 pcs
Price: $5.95
 
Premium Female/Male Jumper Wires – 6″
Price: $4.95
 
Premium Male/Male Jumper Wires – 6″
Price: $4.95
 

   

  Difficulty Level

Soldering Skill: N/A
Prototyping Skill: Beginner
Programming Skill: N/A

  Product Certifications

  Product Attributes

Weight: 450 g

  Warranty Policy

This product has a 30 Day Warranty from the date of delivery. The item must not be modified, abused, incorrectly hooked up, or used for purposes outside the original scope of design.

  Return Policy

This product is returnable Within 14 Days of delivery for a store credit. Item must be unopened, unused, and in re-saleable condition.

 
More Information:
For more information on our Warranty and Return Policies, please consult our   Terms of Service
 

Comments

There are no comments yet.

Be the first to comment on “Solderless Breadboard – XL”

Your email address will not be published. Required fields are marked *

 Suggested Additions:

Insulated Silicone Work Mat

Insulated Silicone Soldering Mat

$14.95

Availability: Low Stock - Only 2 Remaining

This silicone mat is made of 2mm thick silicone and can take just about anything you throw at it. Ideal for keeping your project organized and your workbench from being damaged by soldering and rework tools.

Available

Description

This silicone mat is made of 2mm thick silicone and can take just about anything you throw at it. It is similar to our Insulated Silicone Soldering & Rework Mat but a little better suited to repairs rather than rework.

The silicone is just soft enough with some grip that it doesn’t slide around, and PCBs will stay in place. The heat insulation increases soldering efficiency and keeps whatever you’re working on safely in one spot. You can use hot air, soldering irons, etc without damage to either the mat or iron. It’s anti-stick and resistant to corrosion, glues and other adhesives, and it can be cleaned with some hot soap and water. This mat also features a screw placement grid to keep all those screws in order!

The mat measures 34 cm wide, 23 cm tall and 2mm thick (in the work space)

Features

  • Dimensions: ~340 x 230
  • Thickness(overall): 3.5mm
  • Thickness(workspace): 2mm
  • Non-slip
  • Ideal for Hot Air Rework and Soldering
  • Non-conductive
  • Chemical Resistant

Package Contents

  • 1 x Insulated Silicone Soldering Mat

May We Also Suggest…

Adjustable 30W 110V Soldering Iron
Price: $42.95
 
Atten 65W Soldering Iron – ST-2065D
Price: $59.95
 

   

  Difficulty Level

Soldering Skill: N/A
Prototyping Skill: N/A
Programming Skill: N/A

  Product Certifications

  Product Attributes

Weight: 270 g

  Warranty Policy

This product has a 30 Day Warranty from the date of delivery. The item must not be modified, abused, incorrectly hooked up, or used for purposes outside the original scope of design.

  Return Policy

This product is returnable Within 14 Days of delivery for a store credit. Item must be unopened, unused, and in re-saleable condition.

 
More Information:
For more information on our Warranty and Return Policies, please consult our   Terms of Service
 

Comments

There are no comments yet.

Be the first to comment on “Insulated Silicone Soldering Mat”

Your email address will not be published. Required fields are marked *

Breadboarding Essentials Kit for Arduino

Breadboarding Essentials Kit for Arduino

$24.95

Brand:

  • BC Robotics
Availability: Out Of Stock

Breadboarding is an important part of developing circuits; our Breadboarding Essentials Kit for Arduino includes all of the important bits for breadboarding with the Arduino. The kit includes 3 breadboards, 40 x 6″ Jumper Wires, 40 x 3″ Jumper Wires, 140 Assorted Breadboard Jumper Wires, and a Large Mounting Plate.

Out Of Stock

Want to be notified when this product is back in stock?

SKU: ARDK-012 Manufacturer: Various Mfg Part Number: ARDK-012 Categories: , Tags: , ,

Description

Breadboarding is an important part of developing circuits; our Breadboarding Essentials Kit for Arduino includes all of the important bits for breadboarding with the Arduino.

In each kit we include a Large, Half, and Mini solderless breadboard. Having several breadboards means you don’t have to take everything off all the time! We also include a 140 piece pre-formed Jumper Wire Set. These are a nice, neat, way to connect everything up on your solderless breadboard. A set of 3” and 6” Premium Male / Male jumper wires are also in this kit. These are perfect for connecting your Arduino to the Solderless Breadboard and other devices. Finally, we also include one of our Arduino Mounting Plates. These plates are designed to hold your breadboard and Arduino in place and prevent things from moving around too much.

Compatible with Arduino Uno, Leonardo, Mega, Mega ADK, Due, SparkFun Redboard, Redboard Photon, Adafruit Metro, Adafruit Metro M0 and more!

Please Note: Arduino, Battery Case, and Sensor not included.

 

Features

  • Compatible with Arduino, Adafruit Metro, SparkFun Redboard
  • Includes Arduino Mounting Plate
  • Includes 3 Breadboard Sizes
  • Includes 140 Piece Jumper Wire Set
  • Includes 40 x 3″ Premium Jumper Wires
  • Includes 40 x 6″ Premium Jumper Wires

 

  Difficulty Level

Soldering Skill: N/A
Prototyping Skill: Beginner
Programming Skill: N/A

  Product Certifications

  Product Attributes

Weight: 355 g

  Warranty Policy

This product has a 30 Day Warranty from the date of delivery. The item must not be modified, abused, incorrectly hooked up, or used for purposes outside the original scope of design.

  Return Policy

This product is returnable Within 14 Days of delivery for a store credit. Item must be unopened, unused, and in re-saleable condition.

 
More Information:
For more information on our Warranty and Return Policies, please consult our   Terms of Service
 

Comments

There are no comments yet.

Be the first to comment on “Breadboarding Essentials Kit for Arduino”

Your email address will not be published. Required fields are marked *

SparkFun Paper Circuit Kit

SparkFun Paper Circuit Kit

$21.95

Brand:

  • SparkFun
Availability: Retired

Welcome to the world of paper circuits – creating electronic projects directly on paper using simple components! The SparkFun Paper Circuits Kit teaches the basics and fundamentals of creating an electric circuit without the need to solder or code a single thing! 10 fun and informative light up robot cards in each kit.

Out Of Stock

SKU: KIT-057 Manufacturer: SparkFun Mfg Part Number: KIT-15817

Description

Welcome to the world of paper circuits – creating electronic projects directly on paper using simple components! The SparkFun Paper Circuits Kit teaches the basics and fundamentals of creating an electric circuit without the need to solder or code a single thing! Using the provided templates, strips of copper tape, and LEDs, the SparkFun Paper Circuits Kit provides you with 10 fun and informative light up robot cards that should only take between five to 10min to assemble! No previous electronics experience is required.

If you are unfamiliar, a paper circuit is a functioning electronic circuit built on a paper surface instead of a circuit board. Projects can range from greeting cards, to origami, to traditional art such as paintings or drawings. What makes them unique is the use of traditional fine art techniques to create a circuit that is combines aesthetics and functionality. Paper circuits are becoming more and more popular in the hobby electronics world. The easy availability of craft-like materials and increasing abundance of new products has created a really unique ecosystem for crafters looking to make the leap to electronics projects.

The only things you will need to get each simple circuit card built, that aren’t included in SparkFun Paper Circuits Kit, are CR2032 coin cell batteries, scissors, a hole punch, tape, and any coloring supplies to make your little robot pop.

Paper Circuit Templates (PDFs):

Features

  • No soldering required
  • No coding required
  • Kit includes enough components to make 10 Robot Cards

Package Contents

  • 10x Printed Robot Template Card
  • 10x Copper Tape - 1ft
  • 10x Yellow LED - 5mm
  • 10x Binder Clip

  Difficulty Level

Soldering Skill: N/A
Prototyping Skill: Beginner
Programming Skill: N/A

  Product Certifications

  Product Attributes

Weight: 105 g

  Warranty Policy

This product has a 30 Day Warranty from the date of delivery. The item must not be modified, abused, incorrectly hooked up, or used for purposes outside the original scope of design.

  Return Policy

This product is Final Sale and cannot be returned once purchased. 

More Information:
For more information on our Warranty and Return Policies, please consult our   Terms of Service
 

Comments

There are no comments yet.

Be the first to comment on “SparkFun Paper Circuit Kit”

Your email address will not be published. Required fields are marked *

2WD Aluminum Robot Chassis Kit

2WD Aluminum Robot Chassis Kit – Purple or Rose

$20.95

Availability: In Stock

Looking for a sturdy, 2 wheel drive chassis to build your first self navigating robot? This aluminum chassis is perfect for the job! The kit is easy to assemble and offers a ton of different mounting points for your microcontroller, servos, sensors, and other additions.

Available

SKU: ROB-131 Category: Tags: , ,

Description

Looking for a sturdy, 2 wheel drive chassis to build your first self navigating robot? This aluminum chassis is perfect for the job! The kit is easy to assemble and offers a ton of different mounting points for your microcontroller, servos, sensors, and other additions.

The chassis is anodized aluminum, and features many pre-tapped mounting holes. The holes are tapped with an M3 thread, meaning the chassis works well with our M3 Nylon Standoff Set. Mounting holes are compatible with most Arduino and other popular boards. The chassis itself may be purple or rose in color.

The kit includes two 3-6V gearmotors, two wheels, a ball caster wheel, and all of the hardware to assemble it.

Note: For Arduino, BBC micro:bit, and Raspberry Pi applications: we recommend using a 4 x AA battery pack. Most Arduino and Raspberry Pi motor controllers require a minimum of 4.5V to function (including the recommended products above). For Raspberry Pi we recommend a separate power source for the Raspberry Pi capable of supporting the Pi’s power needs.

Features

  • Motor Voltage: 3-6V
  • Assembled Length: 170mm
  • Assembled Width: 130mm
  • Assembled Height: 66mm
  • Complete chassis kit - just add motor driver, battery pack, & microcontroller
  • Wheel Diameter: 66mm
  • Wheel Width: 16mm
  • Includes all hardware

Package Contents

  • 1 x 2WD Aluminum Robot Chassis (Purple OR Rose)
  • 2 x TT Motor Wheel
  • 2 x TT Motor
  • 1 x Ball Caster Wheel
  • 1 x M3 Hardware Pack

May We Also Suggest…

Encoder Disc
Price: $0.50
 
IR Analog Distance Sensor (10-80cm)
Price: $11.95
 
IR Analog Distance Sensor (20-150cm)
Price: $14.95
 
IR Analog Distance Sensor (4-30 cm)
Price: $12.95
 
Opto-Interrupter with Mounting Tabs
Price: $1.95
 
Ultrasonic Distance Transducer – HY-SRF05
Price: $5.95
 

   

  Difficulty Level

Soldering Skill: Beginner
Prototyping Skill: Beginner
Programming Skill: N/A

  Product Certifications

  Product Attributes

Weight: 500 g

  Warranty Policy

This product has a 30 Day Warranty from the date of delivery. The item must not be modified, abused, incorrectly hooked up, or used for purposes outside the original scope of design.

  Return Policy

This product is returnable Within 14 Days of delivery for a store credit. Item must be unopened, unused, and in re-saleable condition.

 
More Information:
For more information on our Warranty and Return Policies, please consult our   Terms of Service
 

Comments

There are no comments yet.

Be the first to comment on “2WD Aluminum Robot Chassis Kit – Purple or Rose”

Your email address will not be published. Required fields are marked *

 Suggested Additions:

Conway's Game of Life Kit v1.3

Conway’s Game of Life Kit (v1.3)

$20.95

Brand:

  • Adafruit
Availability: Temporarily Out Of Stock

This soldering kit has large through hole components making this an excellent project for anyone beginning with soldering or electronics. Completed kits can be connected together as modules, allowing for much larger display.

Out of Stock - Available on Backorder

Want to be notified when this product is back in stock?

SKU: KIT-004 Manufacturer: Adafruit Industries Mfg Part Number: 89 Category: Tags: , ,

Description

The Game of Life is a 1-player game created by John Conway in 1970. The game simulates ‘colonies’ that grow or die based on the colonies around them. This electronics project plays Conway’s game automatically once assembled.

This soldering kit has large through hole components making this an excellent project for anyone beginning with soldering or electronics. Completed kits can be connected together as modules, allowing for much larger display.

[youtube width=”480″ height=”320″ video_id=”S_FXZ4zusas”]

 

Features

  • Each kit displays a 4×4 grid (16 LEDs)
  • Runs off of 2 AA batteries (not included), but can be easily modified to run off of USB or wall-wart power
  • Automatically resets if the colony has died or stagnated (regeneration)
  • Connect as many kits as you’d like, in any configuration, to create a larger game board
  • On/Off button to save power, also for resetting the display
  • Backwards compatible with older versions

 

Resources

Tutorials:
Game of Life: http://learn.adafruit.com/game-of-life/

 

  Difficulty Level

Soldering Skill: Beginner
Prototyping Skill: N/A
Programming Skill: N/A

  Product Certifications

  Product Attributes

Weight: 38 g

  Warranty Policy

This product has a 30 Day Warranty from the date of delivery. The item must not be modified, abused, incorrectly hooked up, or used for purposes outside the original scope of design.

  Return Policy

This product is returnable Within 14 Days of delivery for a store credit. Item must be unopened, unused, and in re-saleable condition.

 
More Information:
For more information on our Warranty and Return Policies, please consult our   Terms of Service
 

Comments

There are no comments yet.

Be the first to comment on “Conway’s Game of Life Kit (v1.3)”

Your email address will not be published. Required fields are marked *

 Suggested Additions:

Raspberry Pi Pico Starter Kit

Raspberry Pi Pico H Starter Kit

$24.95

Brand:

  • BC Robotics
Availability: Low Stock - Only 1 Remaining

The Raspberry Pi Pico Starter Kit is a great way to get the Pico with all of the needed accessories to dive in to this new Microcontroller. The kit includes the Raspberry Pi Pico H, a programming cable, a large solderless breadboard, and a bunch of different components to experiment with – 55 pieces in total!

Available

SKU: RAS-199 Manufacturer: BC Robotics Inc. Mfg Part Number: RAS-199 Categories: , Tags: , , , , ,

Description

The Raspberry Pi Pico Starter Kit is a great way to get the Pico with all of the needed accessories to dive in to this new Microcontroller. The kit includes the Raspberry Pi Pico H, a programming cable, a large solderless breadboard, and a bunch of different components to experiment with – 55 pieces in total!

What is the Pico? The Raspberry Pi Pico is a low-cost, high-performance microcontroller board with flexible digital interfaces. It feature the RP2040 which marks Raspberry Pi’s first microcontroller designed in-house. Pico provides minimal (yet flexible) external circuitry to support the RP2040 chip (Flash, crystal, power supplies and decoupling and USB connector). The majority of the RP2040 microcontroller pins are brought to the user IO pins on the left and right edge of the board. Four RP2040 IO are used for internal functions – driving an LED, on-board Switched Mode Power Supply (SMPS) power control and sensing the system voltages.

Pico uses an on-board buck-boost SMPS which is able to generate the required 3.3 volts (to power RP2040 and external circuitry) from a wide range of input voltages (~1.8 to 5.5V). This allows significant flexibility in powering the unit from various sources such as a single Lithium-Ion cell, or 3 AA cells in series. Battery chargers can also be very easily integrated with the Pico power chain. Reprogramming the Pico’s flash memory can be done using USB (simply drag and drop a file onto the Pico which appears as a mass storage device) or via the Serial Wire Debug (SWD) port. The SWD port can also be used to interactively debug code running on the RP2040

Please Note: As of January 20th 2023, this kit now includes an assembled Pico H and no longer requires any soldering

Features

  • Includes Raspberry Pi Pico H
  • 55 Piece Kit
  • No Soldering Required

Package Contents

  • 1 x Raspberry Pi Pico H
  • 1 x Large Solderless Breadboard
  • 1 x 1.5′ USB A Male to Micro Cable
  • 1 x 40pcs Premium Male/Male Jumper Wires
  • 1 x 10K Trim Pot
  • 1 x Passive Buzzer
  • 3 x Large Tactile Button
  • 5 x Yellow LED
  • 5 x Orange LED
  • 5 x Green LED
  • 5 x Blue LED
  • 5 x Red LED
  • 10 x 10K Resistor
  • 10 x 220 Ohm Resistor
  • 1 x CDS Photocell

May We Also Suggest…

Breadboard Friendly Jumper Wire Kit – 140 pcs
Price: $5.95
 
Raspberry Pi Pico H Experiment Kit
Price: $49.95
 
Single Compartment Storage Box
Price: $6.95
 

   

  Difficulty Level

Soldering Skill: Beginner
Prototyping Skill: Beginner
Programming Skill: Beginner

  Product Certifications

  Product Attributes

Weight: 154 g

  Warranty Policy

This product has a 30 Day Warranty from the date of delivery. The item must not be modified, abused, incorrectly hooked up, or used for purposes outside the original scope of design.

  Return Policy

This product is returnable Within 14 Days of delivery for a store credit. Item must be unopened, unused, and in re-saleable condition.

 
More Information:
For more information on our Warranty and Return Policies, please consult our   Terms of Service
 

Comments

There are no comments yet.

Be the first to comment on “Raspberry Pi Pico H Starter Kit”

Your email address will not be published. Required fields are marked *

6" Digital Calipers

6″ Digital Calipers

$22.95

Brand:

  • SparkFun
Availability: Temporarily Out Of Stock

Digital calipers are an absolute essential for any workbench. These premium calipers come with an extra battery and auto shut-off function. Measurements can be taken in either metric or standard up to 6″ in length.

Out of Stock - Available on Backorder

Want to be notified when this product is back in stock?

SKU: TOL-043 Manufacturer: SparkFun Mfg Part Number: TOL-10997 Category: Tag:

Description

Description

Digital calipers are an absolute essential for any workbench. These premium calipers come with an extra battery and auto shut-off function. Measurements can be taken in either metric or standard up to 6″ in length.

The calipers ship in a nice padded carrying case and include a spare 1.5V LR44 button cell


Features

  • Length: 6″ / 150mm
  • Includes carrying case
  • Metric and Imperial measurements
  • Ships with a spare battery


Resources


  Difficulty Level

Soldering Skill: N/A
Prototyping Skill: N/A
Programming Skill: N/A

  Product Certifications

  Product Attributes

Weight: 326 g

  Warranty Policy

This product has a 30 Day Warranty from the date of delivery. The item must not be modified, abused, incorrectly hooked up, or used for purposes outside the original scope of design.

  Return Policy

This product is returnable Within 14 Days of delivery for a store credit. Item must be unopened, unused, and in re-saleable condition.

 
More Information:
For more information on our Warranty and Return Policies, please consult our   Terms of Service
 

Comments

There are no comments yet.

Be the first to comment on “6″ Digital Calipers”

Your email address will not be published. Required fields are marked *

Pro's Kit 20W 110V Soldering Iron

 Suggested Additions:

Official Raspberry Pi Mouse - Red

Pro's Kit Hook Set - 5 Pieces

Pro’s Kit Hook Set – 5 Pieces

$14.00

Availability: In Stock - Available While Quantities Last

Having a good set of hooks is really helpful around the workbench. This kit includes four hooks, a flat prying tool, and a threaded handle that extends each tool. These are ideal for prying open cases, connector tabs, and generally getting into places where your hands don’t fit.

Available

SKU: TOL-127 Manufacturer: Pro's Kit Mfg Part Number: 1PK-3175 Category: Tags: ,

Description

Having a good set of hooks is really helpful around the workbench. This kit includes four hooks, a flat prying tool, and a threaded handle that extends each tool. These are ideal for prying open cases, connector tabs, and generally getting into places where your hands don’t fit.

 

Features

  • Stainless Steel
  • Tool Lengths: Approx. 125mm
  • 1 x W-Hook
  • 1 x Lift Hook
  • 1 x Extension Handle
  • Includes Carrying Case
  • Handle Length: 105mm
  • 1 x Angle Hook
  • 1 x Bent Hook
  • 1 x J-Hook

 

  Difficulty Level

Soldering Skill: N/A
Prototyping Skill: N/A
Programming Skill: N/A

  Product Certifications

  Product Attributes

Weight: 55 g

  Warranty Policy

This product has a 30 Day Warranty from the date of delivery. The item must not be modified, abused, incorrectly hooked up, or used for purposes outside the original scope of design.

  Return Policy

This product is Final Sale and cannot be returned once purchased. 

More Information:
For more information on our Warranty and Return Policies, please consult our   Terms of Service
 

Comments

There are no comments yet.

Be the first to comment on “Pro’s Kit Hook Set – 5 Pieces”

Your email address will not be published. Required fields are marked *

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Custom attributes
  • Custom fields
Click outside to hide the comparison bar
Compare