BC Robotics

2022 Holiday Gift Guide – Tools & Soldering

2022 Holiday Gift Guide – Tools & Soldering

Atten 65W Soldering Iron – ST-2065D

Atten 65W Soldering Iron – ST-2065D

$59.95

Availability: Low Stock - Only 1 Remaining

Not all corded soldering irons are created equally! This powerful pen-type Atten 65-Watt Soldering Iron carries most of the capabilities of soldering stations, in a compact easy to handle pen-type iron. We love the durability, strong grounded cord, nice handle, and fast heat up designed with PTC ceramic material!

Available

SKU: TOL-136 Manufacturer: Atten Mfg Part Number: ST-2065D Category: Tags: ,

Description

When you don’t need a full soldering ‘station’ this pen type iron will fulfill your needs. At 65W it can really handle any task you throw at it, and the lovely adjustable knob on the side lets you set the temperature so you get just the right temperature for your lead or lead free solder. Once it is cooled off, you can easily coil it up and toss it into your workbox to keep your desk top clear. The iron is ESD Safe and designed to be a more portable version of a soldering workstation, rather than an inexpensive iron.

The iron is fully adjustable and rated to 65W – so it heats up fast. It has an operational temperature range of 250ºC-480ºC, For most lead free soldering, try 400°C. For lead-based solder, 350°C will do. Adjust as necessary using the integrated display and buttons!

The soldering iron includes a small manual and works with most Hakko compatible T18 series tips. We recommend purchasing a Soldering Iron Stand or Deluxe Soldering Iron Stand with this iron.

Features

  • Power Rating: 65W
  • Temperature Range: 250ºC-480ºC
  • Typical Accuracy: ±10°C
  • Cable Length: 1.5m
  • Input Voltage: 110 – 120VAC
  • ESD Safe
  • Uses Hakko compatible T18 Tips

Package Contents

  • 1 x Atten 65W Soldering Iron - ST-2065D with standard tip.

May We Also Suggest…

63/37 Leaded Solder Spool – 100g
Price: $13.95
 
Insulated Silicone Rework Mat – 23x18cm
Price: $9.95
 
Mini Solder Tube – 63/37 Leaded – 15g
Price: $5.95
 
Solder Sucker
Price: $4.95
 
Soldering Iron Stand
Price: $10.95
 
Third Hand With Magnifying Glass
Price: $10.95
 

   

  Difficulty Level

Soldering Skill: Beginner
Prototyping Skill: N/A
Programming Skill: N/A

  Product Certifications

  Product Attributes

Weight: 300 g
Cable Length:

1.5m / ~5'

Input Voltage:

110 – 120VAC

  Warranty Policy

This product has a 30 Day Warranty from the date of delivery. The item must not be modified, abused, incorrectly hooked up, or used for purposes outside the original scope of design.

  Return Policy

This product is returnable Within 14 Days of delivery for a store credit. Item must be unopened, unused, and in re-saleable condition.

 
More Information:
For more information on our Warranty and Return Policies, please consult our   Terms of Service
 

Comments

There are no comments yet.

Be the first to comment on “Atten 65W Soldering Iron – ST-2065D”

Your email address will not be published. Required fields are marked *

 Suggested Additions:

Deluxe Soldering Iron Stand

Deluxe Soldering Iron Stand

$28.95

Availability: Temporarily Out Of Stock

With a solder spool holder, iron holder, and tinning sponge this soldering iron stand handles all of your soldering needs in one compact unit.

Out of Stock - Available on Backorder

Want to be notified when this product is back in stock?

SKU: TOL-010 Manufacturer: Atten Mfg Part Number: TJ-228 Categories: , Tags: ,

Description

With a solder spool holder, iron holder, and tinning sponge this soldering iron stand handles all of your soldering needs in one compact unit. The metal stand is nice and heavy with a durable powder coated finish. The spool holder will handle rolls up to 1lb in size and the iron holder seems to work with most soldering irons. This is a great accessory for the 30W 110V Soldering Iron – BasicAdjustable Soldering Iron, or the Atten 65W Soldering Iron – ST-2065D!

Please Note: Spool of solder sold separately.

 

Features

  • Built in solder spool holder (up to 1lb spools)
  • For pencil type soldering irons
  • Includes a tinning sponge
  • Easy to assemble

Package Contents

  • 1 x Deluxe Soldering Iron Stand
  • 1 x Tinning Sponge

May We Also Suggest…

63/37 Leaded Solder Spool – 100g
Price: $13.95
 
Lead Free Solder – 100-gram Spool
Price: $15.95
 

   

  Difficulty Level

Soldering Skill: N/A
Prototyping Skill: N/A
Programming Skill: N/A

  Product Certifications

  Product Attributes

Weight: 700 g

  Warranty Policy

This product has a 30 Day Warranty from the date of delivery. The item must not be modified, abused, incorrectly hooked up, or used for purposes outside the original scope of design.

  Return Policy

This product is returnable Within 14 Days of delivery for a store credit. Item must be unopened, unused, and in re-saleable condition.

 
More Information:
For more information on our Warranty and Return Policies, please consult our   Terms of Service
 

Comments

There are no comments yet.

Be the first to comment on “Deluxe Soldering Iron Stand”

Your email address will not be published. Required fields are marked *

 Suggested Additions:

Mini Drill Bit Set - 0.3mm to 1.2mm

Mini Drill Bit Set – 0.3mm to 1.2mm

$9.95

Availability: In Stock

Small drill bits are a great thing to have at any work bench. This set of 10 tiny bits range from 0.3mm to 1.2mm in 0.1mm increments. Each carbide bit has a 1/8” (3.175mm) shank which should work with a variety of rotary and hand tools.

Available

SKU: TOL-068 Categories: , Tags: ,

Description

This 10-piece carbide micro drill bit set is the perfect addition to your toolkit for precise drilling and intricate work in electronics, PCBs, jewelry, model building, and other fine-detail applications. The set includes 10 high-quality drill bits, starting from 0.3mm and increasing in 0.1mm increments up to 1.2mm.

Each drill bit features a durable carbide construction, ensuring longevity and excellent performance, even under demanding conditions. The 1/8″ (3.175mm) shank is designed to fit securely into standard rotary tool collets or chucks, providing stability and reducing the risk of slipping during operation.

These small, yet robust, drill bits are ideal for working with delicate materials such as circuit boards, plastics, woods, and soft metals, while maintaining accuracy and minimizing the risk of damage.

 

Features

  • Set of 10 carbide bits
  • 1/8˝ (3.175mm) shank
  • Handy carrying case
  • 0.3mm to 1.2mm in 0.1mm increments

Package Contents

  • 1 x Mini Drill Bit 0.3mm
  • 1 x Mini Drill Bit 0.4mm
  • 1 x Mini Drill Bit 0.5mm
  • 1 x Mini Drill Bit 0.6mm
  • 1 x Mini Drill Bit 0.7mm
  • 1 x Mini Drill Bit 0.8mm
  • 1 x Mini Drill Bit 0.9mm
  • 1 x Mini Drill Bit 1.0mm
  • 1 x Mini Drill Bit 1.1mm
  • 1 x Mini Drill Bit 1.2mm

May We Also Suggest…

Mini Drill Bit Set – 0.1mm to 1.0mm
Price: $9.95
 
Mini Drill Bit Set – 1.1mm to 2.0mm
Price: $12.95
 

   

  Difficulty Level

Soldering Skill: N/A
Prototyping Skill: N/A
Programming Skill: N/A

  Product Certifications

  Product Attributes

Weight: 50 g

  Warranty Policy

This product has a 30 Day Warranty from the date of delivery. The item must not be modified, abused, incorrectly hooked up, or used for purposes outside the original scope of design.

  Return Policy

This product is returnable Within 14 Days of delivery for a store credit. Item must be unopened, unused, and in re-saleable condition.

 
More Information:
For more information on our Warranty and Return Policies, please consult our   Terms of Service
 

Comments

There are no comments yet.

Be the first to comment on “Mini Drill Bit Set – 0.3mm to 1.2mm”

Your email address will not be published. Required fields are marked *

SparkFun Heaterizer XL-3000

SparkFun Heaterizer XL-3000

$24.95

Brand:

  • SparkFun
Availability: Low Stock - Only 2 Remaining

The SparkFun Heaterizer XL-3000 heat gun is a handy tool that everyone should have. The nozzle temperature is ~ 250℃ so it’s great for heat-shrink, melting things, and even very basic low temp rework. The size is great for a lot of different applications and it heats up pretty quickly.

Available

SKU: TOL-028 Manufacturer: Sparkfun Mfg Part Number: TOL-10326 Category: Tag:

Description

DescriptionThe SparkFun Heaterizer XL-3000 heat gun is a handy tool that everyone should have. The nozzle temperature is ~ 250℃ so it’s great for heat-shrink, melting things, and even very basic low temp rework. The size is great for a lot of different applications and it heats up pretty quickly.

Features

  • 300 watts of heating power
  • Nozzle Temperature: 250℃
  • 110v operation only
  • Flip-out stand

Package Contents

  • 1 x SparkFun Heaterizer XL-3000

May We Also Suggest…

1/4″ Heat Shrink Tubing – 4′
Price: $5.50
 
127 Piece Black Heat Shrink Kit
Price: $11.95
 
385 Piece Heat Shrink Kit
Price: $17.95
 
Insulated Silicone Soldering & Rework Mat
Price: $17.95
 
Insulated Silicone Soldering Mat
Price: $14.95
 

   

  Difficulty Level

Soldering Skill: N/A
Prototyping Skill: N/A
Programming Skill: N/A

  Product Certifications

  Product Attributes

Weight: 356 g

  Warranty Policy

This product has a 30 Day Warranty from the date of delivery. The item must not be modified, abused, incorrectly hooked up, or used for purposes outside the original scope of design.

  Return Policy

This product is returnable Within 14 Days of delivery for a store credit. Item must be unopened, unused, and in re-saleable condition.

 
More Information:
For more information on our Warranty and Return Policies, please consult our   Terms of Service
 

Comments

There are no comments yet.

Be the first to comment on “SparkFun Heaterizer XL-3000”

Your email address will not be published. Required fields are marked *

 Suggested Additions:

Third Hand With Magnifying Glass

Third Hand With Magnifying Glass

$10.95

Availability: In Stock

The third hand is an essential workbench accessory. Whether you are building models, soldering wires, or assembling electronics – this tool keeps everything held in place, leaving your hands free to solder, glue, inspect, etc.

Available

SKU: TOL-007 Manufacturer: Categories: , Tags: ,

Description

The third hand is an essential workbench accessory. Whether you are building models, soldering wires, or assembling electronics – this tool keeps everything held in place, leaving your hands free to solder, glue, inspect, etc.

The third hand has two position-able “alligator clip” grippers that can be moved and set using the thumbscrews and wing nuts. There is also a magnifying glass that can be positioned to help see those tiny components and details!

If you are working with sensitive parts, or soft items that may be damaged by the alligator grippers, we recommend throwing a little heat shrink tubing over the claws – this will take some of the bite out of the metal, but still maintain a good grip!

Features

  • 2 Alligator Clips
  • Heavy cast iron base to keep it upright
  • Magnifying glass

Package Contents

  • 1 x Third Hand With Magnifying Glass

May We Also Suggest…

Deluxe Metal PCB Work Station
Price: $47.95
 
Insulated Silicone Soldering Mat
Price: $14.95
 
Magnetic Parts Tray
Price: $3.95
 
Solder Wire Holder Stand – TJ-227
Price: $13.95
 
SparkFun Third Hand Kit
Price: $49.95
 
Techspray #2 Solder Wick
Price: $8.95
 

   

  Difficulty Level

Soldering Skill: N/A
Prototyping Skill: N/A
Programming Skill: N/A

  Product Certifications

  Product Attributes

Weight: 403 g

  Warranty Policy

This product has a 30 Day Warranty from the date of delivery. The item must not be modified, abused, incorrectly hooked up, or used for purposes outside the original scope of design.

  Return Policy

This product is returnable Within 14 Days of delivery for a store credit. Item must be unopened, unused, and in re-saleable condition.

 
More Information:
For more information on our Warranty and Return Policies, please consult our   Terms of Service
 

Comments

There are no comments yet.

Be the first to comment on “Third Hand With Magnifying Glass”

Your email address will not be published. Required fields are marked *

Pro's Kit Repair Kit - 17 Pcs

Pro’s Kit Repair Kit – 17 Pcs

$12.00

Availability: In Stock - Available While Quantities Last

This 17 in 1 Tool Kit is designed primarily for disassembling Apple products, however, we think this comes in handy for a lot of other hardware hacking and repairing. The kit contains a comfortable screwdriver with 13 different interchangeable bits, three types of plastic prying tool, and a suction cup.

Available

SKU: TOL-119 Manufacturer: Pro's Kit Mfg Part Number: SD-9314 Categories: , Tags: ,

Description

This 17 in 1 Tool Kit is designed primarily for disassembling Apple products, however, we think this comes in handy for a lot of other hardware hacking and repairing. The kit contains a comfortable screwdriver with 13 different interchangeable bits, three types of plastic prying tool, and a suction cup.

The kit has 12 screwdriver bits (P2, PH000, H2.0mm, H1.5mm, T4, T5, T6, T8, T10, T15, T20, a 1.5mm Flat) and a needle pin bit (for popping out sim cards, hitting device reset buttons). The T5 is hidden inside the screwdriver handle, just pop the black end cap off to get it out.

The three types of prying tools are used to open cases and enclosures and generally pry at things while reducing the risk of surface damage to whatever you are prying against. These are plastic and shouldn’t be forced too much!

The suction cup is used to help lift screens and generally pull things apart as well, the suction cup measures 36mm in diameter and has a handy pull ring.

All of these tools are stored in a hard plastic case with trays to keep everything in place.

Features

  • 17 tools in one handy carrying case
  • Case Dimensions: 130 x 100 x 30mm

Package Contents

  • 12 x Screwdriver Bits
  • 1 x Flat Prying Paddle
  • 1 x Suction Cup (36mm)
  • 1 x Needle Pin
  • 1 x Precision Screwdriver Handle
  • 2 x Opening Levers
  • 1 x Carrying Case

  Difficulty Level

Soldering Skill: N/A
Prototyping Skill: N/A
Programming Skill: N/A

  Product Certifications

  Product Attributes

Weight: 250 g

  Warranty Policy

This product has a 30 Day Warranty from the date of delivery. The item must not be modified, abused, incorrectly hooked up, or used for purposes outside the original scope of design.

  Return Policy

This product is Final Sale and cannot be returned once purchased. 

More Information:
For more information on our Warranty and Return Policies, please consult our   Terms of Service
 

Comments

There are no comments yet.

Be the first to comment on “Pro’s Kit Repair Kit – 17 Pcs”

Your email address will not be published. Required fields are marked *

Pro's Kit 6 Piece Soldering Aid Kit

Pro’s Kit 6 Piece Soldering Aid Kit

$13.00

Availability: Low Stock - Only 2 Remaining

Sometimes a repair on a circuit board requires a little more than a soldering iron. This tool kit has 6 dual purpose hand tools for prying, pulling, moving, and cleaning components and the board itself.

Available

SKU: TOL-117 Manufacturer: Pro's Kit Mfg Part Number: 1PK-3616 Categories: , , Tags: ,

Description

Sometimes a repair on a circuit board requires a little more than a soldering iron. This tool kit has 6 dual purpose hand tools. There are two types of chip holder, a lever for lifting ICs and capacitors, a fork shaft for bending leads, two types of scraper, a needle edged lifter for flat ICs, a hook for pulling through hole components, a reamer for cleaning out through holes, a knife for cutting traces, and two brushes for cleaning.

Package Contents

  • 2 x Component Holders
  • 1 x Fork Shaft (Lead Bending)
  • 1 x Needle Edged Lifter
  • 1 x Trace Cutting Knife
  • 1 x Reamer
  • 1 x Lever (For ICs / Capacitors)
  • 2 x Scrapers
  • 2 x Cleaning Brush
  • 1 x Component Hook

May We Also Suggest…

Chip Quik No-Clean Flux Pen – 10mL
Price: $15.95
 
Hot Air Soldering Rework Station – Quick 957DW+
Price: $254.95
 
Rosin Flux Paste – 50g
Price: $23.95
 
SparkFun Heaterizer XL-3000
Price: $24.95
 
Techspray #2 Solder Wick
Price: $8.95
 

   

  Difficulty Level

Soldering Skill: N/A
Prototyping Skill: N/A
Programming Skill: N/A

  Product Certifications

  Product Attributes

Weight: 91 g

  Warranty Policy

This product has a 30 Day Warranty from the date of delivery. The item must not be modified, abused, incorrectly hooked up, or used for purposes outside the original scope of design.

  Return Policy

This product is returnable Within 14 Days of delivery for a store credit. Item must be unopened, unused, and in re-saleable condition.

 
More Information:
For more information on our Warranty and Return Policies, please consult our   Terms of Service
 

Comments

There are no comments yet.

Be the first to comment on “Pro’s Kit 6 Piece Soldering Aid Kit”

Your email address will not be published. Required fields are marked *

Weller WE1010 Soldering Station

Weller WE1010 Soldering Station

$274.95

Availability: Temporarily Out Of Stock

The Weller WE1010 is a modern replacement for the iconic WES51. But don’t worry, this new Weller has just about every feature you could ask for. These are ideal for commercial use and should stand up to years of heavy operation in a manufacturing setting without a sweat. But don’t think they are just for work, these are a treat to work with and perfect for any well sorted hobbyist bench as well!

Out of Stock - Available on Backorder

Want to be notified when this product is back in stock?

SKU: TOL-095 Manufacturer: Weller Mfg Part Number: WE1010 Category: Tags: ,

Description

The Weller WE1010 is a modern replacement for the iconic WES51. But don’t worry, this new Weller has just about every feature you could ask for.

To start, Weller has upped the power; the WE1010 is rated at 70W – meaning heat up / recovery times are significantly reduced. The analog control knob has been replaced with digital controls – a large LCD screen displays the current tip temperature and the set temperature as well. Standby mode and auto set back conserve energy, and protect equipment when the iron is on, but not in use.

A long heat-resistant silicon cable connects the wand to the base station. The iron is easy to maneuver and does not suffer from the same mobility problems of the lower cost handheld soldering irons. The iron uses the same familiar “ET” series tips as the WES51 – replacement ETA tips are available.

These are ideal for commercial use and should stand up to years of heavy operation in a manufacturing setting without a sweat. But don’t think they are just for work, these are a treat to work with and perfect for any well sorted hobbyist bench as well!

Features

  • Dimensions: 150 x 125 x 100mm
  • Temperature Range: 200 - 850F / 100 - 450C
  • Temperature Accuracy: +/- 9C
  • Temperature Stability: +/- 2C
  • Password-protected to preserve settings
  • Heat-resistant silicon cable
  • Power: 70W
  • Input Voltage: 120V / 60Hz
  • ESD Safe
  • Replacement parts available
  • Standby mode and auto set back conserve energy, protect equipment
  • Uses \"ET\" series Weller tips

Package Contents

  • 1 x WE1 Station 120V
  • 1 x WEP70 Soldering Iron
  • 1 x PH70 Safety Rest With Sponge
  • 1 x ETA Tip 0.062” / 1.6 MM

May We Also Suggest…

Replacement Tinning Sponge
Price: $3.95
 
Solder Sucker
Price: $4.95
 
Techspray #2 Solder Wick
Price: $8.95
 
Weller PES51 Tip – ETA
Price: $9.95
 
Weller PES51 Tip – ETD
Price: $9.95
 
Weller PES51 Tip – ETO
Price: $9.95
 

   

  Difficulty Level

Soldering Skill: Beginner
Prototyping Skill: N/A
Programming Skill: N/A

  Product Certifications

  Product Attributes

Weight: 2652 g

  Warranty Policy

This product has a 30 Day Warranty from the date of delivery. The item must not be modified, abused, incorrectly hooked up, or used for purposes outside the original scope of design.

  Return Policy

This product is Final Sale and cannot be returned once purchased. 

More Information:
For more information on our Warranty and Return Policies, please consult our   Terms of Service
 

Comments

There are no comments yet.

Be the first to comment on “Weller WE1010 Soldering Station”

Your email address will not be published. Required fields are marked *

 Suggested Additions:

SparkFun Basic Multimeter

SparkFun Basic Multimeter

$23.95

Brand:

  • SparkFun
Availability: Temporarily Out Of Stock

The digital multimeter (DMM) is an essential tool in every electronic enthusiasts arsenal. The SparkFun Digital Multimeter, however, is not your average multimeter, it features a loud continuity sound, current/voltage sense, and quality probes. You can use the multimeter to measure DC and AC voltage, DC current, resistance, continuity, and test diodes.

Out of Stock - Available on Backorder

Want to be notified when this product is back in stock?

SKU: TOL-059 Manufacturer: SparkFun Electronics Mfg Part Number: TOL-12966 Category: Tags: ,

Description

The digital multimeter (DMM) is an essential tool in every electronic enthusiasts arsenal. The SparkFun Digital Multimeter, however, is not your average multimeter, it features a loud continuity sound, current/voltage sense, and quality probes. You can use the multimeter to measure DC and AC voltage, DC current, resistance, continuity, and test diodes. With this version SparkFun has done away with the bright flashy colors that got them into trouble last time and gone with a nice, neutral gray.

This isn’t your expensive, flashy type of multimeter, this is for all those starving students that need to buy their first good, low-cost digital multimeter. This meter doesn’t have the ability to auto-power off, it isn’t capable of auto-ranging, and it won’t be able to measure frequency. However, with this multimeter you WILL be able to measure DC Voltage from 200mV to 600V, AC Voltage from 200V and 600v, DC Current between 200uA to 10A, and Resistance from 0 to 20M Ohm. We even left a meter on to test the battery life – it lasted more than 170 hours (7 days) before the included 9V gave out!

Features

  • DC Voltage - 200mV/2V/20V/200V/600V
  • DC Current - 200uA/20mA/200mA/10A
  • Continuity Buzzer
  • 2x Testing Probes
  • AC Voltage - 200V/600V
  • Resistance - 0 to 20M Ohm
  • Diode Test
  • Battery included

May We Also Suggest…

Banana to Alligator Coax Cable
Price: $8.00
 
Multimeter Probes + Alligator Clips
Price: $13.95
 
Multimeter Probes – Needle Tipped
Price: $7.95
 
Multimeter Probes – Tweezers
Price: $7.95
 
Standard Multimeter Probe Set
Price: $7.00
 

   

  Difficulty Level

Soldering Skill: N/A
Prototyping Skill: Beginner
Programming Skill: N/A

  Product Certifications

  Product Attributes

Weight: 300 g

  Warranty Policy

This product has a 30 Day Warranty from the date of delivery. The item must not be modified, abused, incorrectly hooked up, or used for purposes outside the original scope of design.

  Return Policy

This product is returnable Within 14 Days of delivery for a store credit. Item must be unopened, unused, and in re-saleable condition.

 
More Information:
For more information on our Warranty and Return Policies, please consult our   Terms of Service
 

Comments

There are no comments yet.

Be the first to comment on “SparkFun Basic Multimeter”

Your email address will not be published. Required fields are marked *

 Suggested Additions:

Deluxe Metal PCB Work Station

Deluxe Metal PCB Work Station

$47.95

Brand:

  • Adafruit
Availability: Temporarily Out Of Stock

This mini rework station is great for electronic work and repair. These were initially marketed for people doing cell phone repair and rework, and we’ve found this to be an excellent workspace for general soldering and electronics as well.

Out of Stock - Available on Backorder

Want to be notified when this product is back in stock?

SKU: TOL-135 Mfg Part Number: 5253 Categories: , Tag:

Description

This rework and soldering work station features a solid metal body with optional grippy rubber feet, two adjustable alligator clip arms, two extra alligator clips, and four magnetic PCB holders. The plate itself weighs in at 600 grams (approx. 1.3lbs) and provides a sturdy workspace. The magnetic PCB holders grip tightly to the metal plate and will accommodate PCBs from 0.2mm up to 2mm in thickness. The PCB sits high enough off the plate to allow room for just about any through hole components on the bottom side. An essential add-on to any electronics workspace!

Features

  • Solid metal body with optional grippy rubber feet
  • Two adjustable alligator clips that attach at the end of the rework plate
  • Magnetic PCB holders that keep your PCB secure for precise rework
  • Dimensions: 220 x 150 x 3mm

Package Contents

  • 1 x Metal Build Plate
  • 2 x Flexible Metal Arm with Alligator Clip
  • 2 x Spare Alligator Clip
  • 4 x PCB Holder - Magnetic Base
  • 4 x Optional Non-Slip Feet

May We Also Suggest…

Chip Quik No-Clean Flux Pen – 10mL
Price: $15.95
 
Chip Quik SMD Removal Kit
Price: $24.50
 
Hot Air Soldering Rework Station – Quick 957DW+
Price: $254.95
 
Pro’s Kit 6 Piece Soldering Aid Kit
Price: $13.00
 
Solder Sucker
Price: $4.95
 
Techspray #2 Solder Wick
Price: $8.95
 

   

  Difficulty Level

Soldering Skill: N/A
Prototyping Skill: N/A
Programming Skill: N/A

  Product Certifications

  Product Attributes

Weight: 850 g
Shipping Dimensions: 220 × 150 × 30 mm

  Warranty Policy

This product has a 30 Day Warranty from the date of delivery. The item must not be modified, abused, incorrectly hooked up, or used for purposes outside the original scope of design.

  Return Policy

This product is returnable Within 14 Days of delivery for a store credit. Item must be unopened, unused, and in re-saleable condition.

 
More Information:
For more information on our Warranty and Return Policies, please consult our   Terms of Service
 

Comments

There are no comments yet.

Be the first to comment on “Deluxe Metal PCB Work Station”

Your email address will not be published. Required fields are marked *

 Suggested Additions:

Insulated Silicone Work Mat

Insulated Silicone Soldering Mat

$14.95

Availability: Low Stock - Only 2 Remaining

This silicone mat is made of 2mm thick silicone and can take just about anything you throw at it. Ideal for keeping your project organized and your workbench from being damaged by soldering and rework tools.

Available

Description

This silicone mat is made of 2mm thick silicone and can take just about anything you throw at it. It is similar to our Insulated Silicone Soldering & Rework Mat but a little better suited to repairs rather than rework.

The silicone is just soft enough with some grip that it doesn’t slide around, and PCBs will stay in place. The heat insulation increases soldering efficiency and keeps whatever you’re working on safely in one spot. You can use hot air, soldering irons, etc without damage to either the mat or iron. It’s anti-stick and resistant to corrosion, glues and other adhesives, and it can be cleaned with some hot soap and water. This mat also features a screw placement grid to keep all those screws in order!

The mat measures 34 cm wide, 23 cm tall and 2mm thick (in the work space)

Features

  • Dimensions: ~340 x 230
  • Thickness(overall): 3.5mm
  • Thickness(workspace): 2mm
  • Non-slip
  • Ideal for Hot Air Rework and Soldering
  • Non-conductive
  • Chemical Resistant

Package Contents

  • 1 x Insulated Silicone Soldering Mat

May We Also Suggest…

Adjustable 30W 110V Soldering Iron
Price: $42.95
 
Atten 65W Soldering Iron – ST-2065D
Price: $59.95
 

   

  Difficulty Level

Soldering Skill: N/A
Prototyping Skill: N/A
Programming Skill: N/A

  Product Certifications

  Product Attributes

Weight: 270 g

  Warranty Policy

This product has a 30 Day Warranty from the date of delivery. The item must not be modified, abused, incorrectly hooked up, or used for purposes outside the original scope of design.

  Return Policy

This product is returnable Within 14 Days of delivery for a store credit. Item must be unopened, unused, and in re-saleable condition.

 
More Information:
For more information on our Warranty and Return Policies, please consult our   Terms of Service
 

Comments

There are no comments yet.

Be the first to comment on “Insulated Silicone Soldering Mat”

Your email address will not be published. Required fields are marked *

Adjustable 30W 110V Soldering Iron

Adjustable 30W 110V Soldering Iron

$42.95

Availability: Low Stock - Only 2 Remaining

Arguably, this is one of the best “pen style” irons out there. This iron is a great choice for beginners and experienced alike, and will handle most light – medium duty soldering. It features adjustable temperature, replaceable tips, an LED power indicator, and even a decent heat up / recovery time.

Available

SKU: TOL-009 Manufacturer: Xytronic Mfg Part Number: 258 Category: Tag:

Description

Soldering irons in this price range tend to vary considerably when it comes to quality. When we first brought this iron in we were surprised at how well it worked! Arguably, this is one of the best “pen style” irons out there. This iron is a great choice for beginners and experienced alike, and will handle most light – medium duty soldering. It features adjustable temperature, replaceable tips, an LED power indicator, and even a decent heat up / recovery time.

The most notable feature is the adjustable temperature – this isn’t terribly common in pencil irons but it is quite useful. The adjustable temperature means you can set the iron temperature (roughly) between 500°F and 800°F (250°C to 450°C), a closed loop temperature control regulates the temperature of the tip. The handle has a power “on” / heater LED to indicate power and a small black dial, used to set the temperature.

This soldering iron does include a very basic flip stand, but we do suggest looking at our Basic Soldering Iron Stand. We also stock replacement tips for this iron: 1/16″ Conical Tip

Features

  • Fast heat up & recover time
  • Variable 250-430°C (500-800°F) temperature control
  • 110VAC only!
  • Phase controlled 16-30W
  • Replacement tips available

Package Contents

  • 1 x Adjustable 30W 110V Soldering Iron

May We Also Suggest…

60/40 Leaded Solder Tube – 20g
Price: $7.95
 
63/37 Leaded Solder Spool – 100g
Price: $13.95
 
Insulated Silicone Soldering Mat
Price: $14.95
 
Solder Sucker
Price: $4.95
 
Soldering Iron Stand
Price: $10.95
 
Techspray #2 Solder Wick
Price: $8.95
 

   

  Difficulty Level

Soldering Skill: Beginner
Prototyping Skill: N/A
Programming Skill: N/A

  Product Certifications

  Product Attributes

Weight: 300 g

  Warranty Policy

This product has a 30 Day Warranty from the date of delivery. The item must not be modified, abused, incorrectly hooked up, or used for purposes outside the original scope of design.

  Return Policy

This product is returnable Within 14 Days of delivery for a store credit. Item must be unopened, unused, and in re-saleable condition.

 
More Information:
For more information on our Warranty and Return Policies, please consult our   Terms of Service
 

Comments

There are no comments yet.

Be the first to comment on “Adjustable 30W 110V Soldering Iron”

Your email address will not be published. Required fields are marked *

 Suggested Additions:

Artech Digital Multimeter – A5030

Artech Digital Multimeter – A5030

$43.95

Availability: Temporarily Out Of Stock

This Smart Digital Multimeter is packed with features; measure AC/DC voltage, AC/DC current, resistance, continuity, capacitance, frequency, temperature, EF, Hz DUTY, and test diodes. Perfect for any workbench!

Out of Stock - Available on Backorder

Want to be notified when this product is back in stock?

SKU: TOL-134 Manufacturer: Artech Mfg Part Number: A5030 Category: Tags: ,

Description

The digital multimeter (DMM) is an essential tool in every electronic enthusiasts arsenal. This Smart Digital Multimeter, however, is not your average multimeter, it features a continuity sound at less than about 40±10Ω, current/voltage sense, and a Smart Measurement feature. You can use the multimeter to measure AC/DC voltage, AC/DC current, resistance, continuity, capacitance, frequency, temperature, EF, Hz DUTY, and test diodes.

With Smart Measurement this multimeter will auto identify the measurement of ACV, DCV, resistance and continuity. This multimeter will also auto range to the optimum range to provide the best resolution and accuracy for the input signal. An auto power off feature is also present on this multimeter. This meter will automatically shut off after approximately 15 minutes of operation.

Note: Two AA batteries are required to operate the Smart Multimeter. These are not included with this product and will need to be purchased separately.

Features

  • DC Voltage: 600mV/6V/60V/600V/1000V
  • AC Voltage: 6V/60V/600V/750V
  • DC Current: 600uA/6000uA/60mA/600mA/6A/20A
  • AC Current: 600uA/6000uA/60mA/600mA/6A/20A
  • Resistance: 600Ω/6kΩ/60kΩ/600kΩ/6MΩ/60MΩ
  • Frequency: 9.999/99.99/9.999K/99.99K/999.9K/9.999MHz
  • DUTY: 10%~90%
  • Capacitance: 9.999nF/99.99nF/999.9n/9.999u/99.99u/999.9uF
  • Temperature: -20~1000℃ / -4~1832℉
  • Diode: Open Voltage: 3.2V
  • Continuity: Buzzer sound at less than about 40±10Ω

Package Contents

  • 1 x Artech Digital Multimeter - A5030
  • 1 x Multimeter Probe Set
  • 1 x Thermocouple Probe

May We Also Suggest…

Multimeter Probes + Alligator Clips
Price: $13.95
 
Multimeter Probes – Needle Tipped
Price: $7.95
 
Multimeter Probes – Tweezers
Price: $7.95
 

   

  Difficulty Level

Soldering Skill: N/A
Prototyping Skill: N/A
Programming Skill: N/A

  Product Certifications

  Product Attributes

Weight: 430 g

  Warranty Policy

This product has a 30 Day Warranty from the date of delivery. The item must not be modified, abused, incorrectly hooked up, or used for purposes outside the original scope of design.

  Return Policy

This product is returnable Within 14 Days of delivery for a store credit. Item must be unopened, unused, and in re-saleable condition.

 
More Information:
For more information on our Warranty and Return Policies, please consult our   Terms of Service
 

Comments

There are no comments yet.

Be the first to comment on “Artech Digital Multimeter – A5030”

Your email address will not be published. Required fields are marked *

 Suggested Additions:

Pro's Kit Hook Set - 5 Pieces

Pro’s Kit Hook Set – 5 Pieces

$14.00

Availability: In Stock - Available While Quantities Last

Having a good set of hooks is really helpful around the workbench. This kit includes four hooks, a flat prying tool, and a threaded handle that extends each tool. These are ideal for prying open cases, connector tabs, and generally getting into places where your hands don’t fit.

Available

SKU: TOL-127 Manufacturer: Pro's Kit Mfg Part Number: 1PK-3175 Category: Tags: ,

Description

Having a good set of hooks is really helpful around the workbench. This kit includes four hooks, a flat prying tool, and a threaded handle that extends each tool. These are ideal for prying open cases, connector tabs, and generally getting into places where your hands don’t fit.

 

Features

  • Stainless Steel
  • Tool Lengths: Approx. 125mm
  • 1 x W-Hook
  • 1 x Lift Hook
  • 1 x Extension Handle
  • Includes Carrying Case
  • Handle Length: 105mm
  • 1 x Angle Hook
  • 1 x Bent Hook
  • 1 x J-Hook

 

  Difficulty Level

Soldering Skill: N/A
Prototyping Skill: N/A
Programming Skill: N/A

  Product Certifications

  Product Attributes

Weight: 55 g

  Warranty Policy

This product has a 30 Day Warranty from the date of delivery. The item must not be modified, abused, incorrectly hooked up, or used for purposes outside the original scope of design.

  Return Policy

This product is Final Sale and cannot be returned once purchased. 

More Information:
For more information on our Warranty and Return Policies, please consult our   Terms of Service
 

Comments

There are no comments yet.

Be the first to comment on “Pro’s Kit Hook Set – 5 Pieces”

Your email address will not be published. Required fields are marked *

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Custom attributes
  • Custom fields
Click outside to hide the comparison bar
Compare