Virtual Environments In Python On Raspberry Pi
RASPBERRY PI GUIDE error: externally-managed-environment × Dismiss this alert. So, you have found yourself looking at another error in your Pi console. Unforuntatly, this
Happy Saturday everyone! We are back with a long weekend edition of our New Product Roundup! This Monday is Family Day in British Columbia, and with that, we will be closed for Saturday through Monday. Orders will begin processing for Shipping and Curbside Pickup Tuesday February 21st at 10am.
Our Sales & Clearance page has been updated with over 70+ items from our Robotics category as well as Clearance items from across the site. Be sure to check it out!
With that out of the way, we have five new additions to the catalog and a newly selected product of the week at 30% off. Let’s go take a look!
Pluggable terminal blocks are a combination screw terminal and board to wire connector. This specific connector set is 3.96mm pitch and has three pins / contacts. The screw terminal will accept 14 – 28AWG wire and the connector itself is rated for 10A.
These high quality 3.50mm (~0.137″) Terminal blocks are a great way to make semi permanent connections between PCB and loose wiring. The terminals will fit 16 – 28 AWG wires and have a rating of 300V / 10A per contact.
Have you ever wanted to stack boards inside an enclosure? Or seat them at a specific height? What if your enclosure doesn’t have any mounting points? These card rails are the solution! The card rails are designed to fit Hammond enclosures and slide right into the slots on the sides.
The card rails are designed for 1.5mm / 0.062” PCBs. This package includes 6 card rails that can be cut to the correct length for your enclosure.
Once your project is up and running you may need somewhere safe to put it! The Hammond 1591AF2SBK enclosure is a durable, black ABS plastic enclosure that is ideal for a variety of electronic projects. It features a flanged base and easy to remove lid. The enclosure is IP54 rated, making it dust and splash resistant.
Removing SMD parts or large through hole components can be a real challenge without the right supplies! The Chip Quick REMKIT will make this as easy as possible. The kit includes special low temperature removal solder, flux, and cleaning pads. This low temperature solder will stay molten at a much lower temperature – giving you plenty of time to get heat onto all of the legs of the component you wish to remove. This version has a leaded alloy, best for use with lead-based solder.
RASPBERRY PI GUIDE error: externally-managed-environment × Dismiss this alert. So, you have found yourself looking at another error in your Pi console. Unforuntatly, this