10mm RGB LED
Need some big indicator LEDs? This huge diffused 10mm RGB LED is really bright so it can be seen in daytime, and from any angle. They go easily into a breadboard and will add that extra zing to your project.
These RGB LEDs have a separate red, green, and blue chip inside meaning these can be used to display just about any color through color-mixing. They are Common-Anode type which means you connect one pin to 5V or so and then tie the other three legs to ground through a current limiting resistor.
- 10mm diameter
- Red: 1.8-2.2V Forward Voltage, at 20mA current, Green: 3.0-3.4V, Blue: 3.0-3.4V
- 50 degree viewing angle
- Red: 623 nm wavelength, Green: 523 nm, Blue: 467 nm
- Red: 700 mcd typical brightness, Green: 2100 mcd, Blue: 900 mcd
10mm RGB LED: http://www.bc-robotics.com/wp-content/uploads/2016/03/FLR-100WAS-RGB.pdf
This product has a 30 Day Warranty from the date of delivery. The item must not be modified, abused, incorrectly hooked up, or used for purposes outside the original scope of design.
This product is returnable Within 14 Days of delivery for a store credit. Item must be unopened, unused, and in re-saleable condition.
There are no comments yet.