12V 20A SPDT Relay
This relay is a SPDT (single pole – double throw) with a contact rating of up to 20A on the Normally Open contact. Typically these will be used in a special footprint on a circuit board (such as our Large Relay Breakout), but they can be made to fit into perfboards with a little creativity. The coil voltage is 12VDC, so applying ~12V across the coil pins will change the contact position of the relay. The contacts can handle voltages up to 277VAC.
- Contact Rating: 20A(NO), 10A(NC)
- Max Voltage: 277VAC
- Coil Voltage: 12VDC
- Coil Current: 83mA
- Turn On Voltage (Max): 9VDC
- Contact Form: 1 Form C
- Coil Resistance: 144 Ohms
- Single Pole Double Throw (SPDT)
- Fully Sealed
- Non Latching
- Turn Off Voltage (Min): 1.2VDC
T9 Relay Series: http://www.bc-robotics.com/datasheets/T9A-Relay.pdf
May We Also Suggest…
This product has a 30 Day Warranty from the date of delivery. The item must not be modified, abused, incorrectly hooked up, or used for purposes outside the original scope of design.
This product is returnable Within 14 Days of delivery for a store credit. Item must be unopened, unused, and in re-saleable condition.
There are no comments yet.