12V Solenoid Valve – 3/4″
This liquid valve is normally closed and has 3/4″ threaded inlet and outlet. The solenoid will open the valve when 12V is applied across the two terminals. Please note: Liquid can only flow in one direction through this valve. Also, there is a 3PSI minimum pressure requirement due to the gasket arrangement inside. The electrical connections are 1/4″ spade terminals.
Please Note: These are not food safe or for use with chemicals.
- Coil resistance: 36 Ohms
- Working Temperature: 1 ℃ – 75 ℃
- Dimensions: 80 x 51.5 x 61.5mm
- Max Pressure: 116 PSI (0.8Mpa)
- 330mA @ 12VDC
- Actuating life: ≥ 1 million cycles
- Weight: 125g
- Min Pressure: 3 PSI (0.02Mpa)
Controlling a Solenoid Valve: http://www.bc-robotics.com/tutorials/controlling-a-solenoid-valve-with-arduino/
This product has a 30 Day Warranty from the date of delivery. The item must not be modified, abused, incorrectly hooked up, or used for purposes outside the original scope of design.
This product is returnable Within 14 Days of delivery. Item must be unopened, unused, and in re-saleable condition.