2 Channel Relay Breakout – 12V

$9.95

Brand:

  • BC Robotics
Availability: Temporarily Out Of Stock

Need to drive high current or high voltage devices with a low voltage or low current signal? This premium dual 10A relay breakout board can handle it! This version of the board uses 12V relays and can be triggered with logic signals from 3.3V to 12VDC – ideal for automotive, marine, and other systems that have 12VDC power.

Out of Stock - Available on Backorder

SKU: BOB-117 Manufacturer: BC Robotics Inc. Mfg Part Number: BOB-117 Categories: , Tags: , ,

Description

Need to drive high current or high voltage devices with a low voltage or low current signal? This premium dual 10A relay breakout board can handle it! This version of the board uses 12V relays and can be triggered with logic signals from 3.3V to 12VDC – ideal for automotive, marine, and other systems that have 12VDC power.

The board uses high quality North American sourced parts. Simply connect 12V power, Ground, and your digital inputs to the 4 pin header and that’s it – no need for any additional components! The wide input range to trigger the relays means anything from a Raspberry Pi or Arduino to 12V power and signal lines can be used to trigger these relays.

Each relay has the Input, Normally Open, and Normally Closed contact broken out to a nice 5mm pitch screw terminal and each trace is separated by isolation routing. Indicator LEDs show the status of the relay coil, when lit the coil is active.

The breakout board is sized to fit directly in a 1591 Small Enclosure. Perfect for making a clean, enclosed control box. Enclosure sold separately.

Please Note: While this board is capable of switching higher voltages, please exercise caution. If you are inexperienced or unsure about how to use this product safely we recommend looking at the IoT Power Relay, which has all of its high voltage circuitry fully enclosed.

Features

  • 10A/250VAC per channel
  • 3.3 - 12V Logic Level Compatible
  • Dimensions: 62.1 x 42.1 x 17.5mm
  • Contact Configuration: 2 x Form C
  • 8A/30VDC per channel
  • Coil Voltage: 12V
  • LEDs to indicate activated relays
  • 4 mounting holes

Package Contents

  • 1 x 2 Channel Relay Breakout - 12V

May We Also Suggest…

4 Pin Molex to Dupont Male Cable
Price: $2.95
 
4/40 x 1/4″ Phillips (Single)
Price: $0.30
 
Flanged Enclosure – 84 x 36 x 60mm
Price: $10.95
 
Molex 2600 Series Pins (Single)
Price: $0.25
 
Molex 4 Pin Housing – 0.100″
Price: $0.75
 

   

  Difficulty Level

Soldering Skill: N/A
Prototyping Skill: Intermediate
Programming Skill: N/A

  Product Certifications

  Product Attributes

Weight: 35 g

  Warranty Policy

This product has a 30 Day Warranty from the date of delivery. The item must not be modified, abused, incorrectly hooked up, or used for purposes outside the original scope of design.

  Return Policy

This product is returnable Within 14 Days of delivery for a store credit. Item must be unopened, unused, and in re-saleable condition.

 
More Information:
For more information on our Warranty and Return Policies, please consult our   Terms of Service
 

Comments

There are no comments yet.

Be the first to comment on “2 Channel Relay Breakout – 12V”

Your email address will not be published. Required fields are marked *