24V 10A SPDT Relay

$4.95

Availability: In Stock

This small relay is a SPDT (Single Pole, Dual Throw) contact arrangement with a coil (toggle voltage) of 24VDC and a current requirement of approximately 15mA. The contacts can handle up to 380VAC / 110VDC with the Normally Open (NO) contact rated to 10A and the Normally Closed (NC) contact rated up to 12A.

Available

SKU: REL-1003 Manufacturer: TE Connectivity Mfg Part Number: J107F1CS1224VDC.36 Category: Tags: , ,

Description

A relay is an electrical device that is used to switch on or off an electrical circuit by opening or closing its contacts in response to a signal. It can be thought of like a toggle switch, where the physical switch can be moved using an electronic signal. This allows relatively low voltage / low current circuits to control much higher power circuits in a relatively isolated manner.

This small relay is a SPDT (Single Pole, Dual Throw) contact arrangement with a coil (toggle voltage) of 24VDC and a current requirement of approximately 15mA. The contacts can handle up to 380VAC / 110VDC with the Normally Open (NO) contact rated to 10A and the Normally Closed (NC) contact rated up to 12A. On application of 24V DC to the coil, the common pin will become disconnected from the NC contact, and connected to the NO contact. The relay is non-latching, and removal of power to the coil will revert to the ā€œnormalā€ state.

Typically these will be used in a special footprint on a circuit board, but they can be made to fit into perfboards with a little creativity or use one of our handyĀ SPDT Relay Breakout PCBs.

Features

  • N.O. Contact Rating: 10A
  • Max Voltage: 380VAC / 110VDC
  • Coil Voltage: 24VDC
  • Coil Current: 15mA
  • Coil Resistance: 1.6k Ohms
  • Single Pole Double Throw (SPDT)
  • Fully Sealed
  • Non Latching
  • Turn On Voltage (Max): 18VDC
  • Turn Off Voltage (Min): 2.4VDC
  • Operate Time: 10ms
  • Release Time: 5ms
  • Contact Material: Silver Tin Oxide (AgSnO)
  • Dimensions: 19.0 x 15.5 x 15.3 mm

Package Contents

  • 1 x 24V 10A SPDT Relay

May We Also Suggestā€¦

24V 20A SPDT Relay
Price: $9.95
 
SPDT Relay Breakout
Price: $1.25
 

   

  Difficulty Level

Soldering Skill: Beginner
Prototyping Skill: Intermediate
Programming Skill: N/A

  Product Certifications

  Product Attributes

Weight: 11 g

  Warranty Policy

This product has a 30 Day Warranty from the date of delivery. The item must not be modified, abused, incorrectly hooked up, or used for purposes outside the original scope of design.

  Return Policy

This product is returnable Within 14 Days of delivery for a store credit. Item must be unopened, unused, and in re-saleable condition.

 
More Information:
For more information on our Warranty and Return Policies, please consult our   Terms of Service
 

Comments

There are no comments yet.

Be the first to comment on “24V 10A SPDT Relay”

Your email address will not be published. Required fields are marked *