Adafruit DRV8871 DC Motor Driver Breakout Board – 3.6A Max
The DVR8871 is a powerful DC motor driver for a single DC motor. The driver has a lot of great features that make it useful in a wide variety of projects using 6.5 to 45V DC motors. 3.3 and 5.0V logic compatible.
The DVR8871 is a powerful DC motor driver for a single DC motor. The driver has a lot of great features that make it useful in a wide variety of projects using DC motors. Using this driver is simple, connect your motor to the OUT terminal block, power your board with anything between 6.5 and 45V on the VMotor pin, and provide a 3 to 5.5V logic level signal to IN1 and IN2. The logic inputs can even be pulsed up to 200KHz!
The board has easy to use current limiting – you can set the current limiting with an external resistor on Rlim. Adafruit has used a 30K resistor by default for a ~2A current limit, however you can remove this resistor and/or solder a resistor over it to change the resistance and change the limit.
- Motor Voltage: 6.5 - 45VDC
- Dimensions: 24.4 x 20.4 x 9.7mm
- PWM control
- Under voltage lockout
- Thermal shutdown
- Logic Voltage: 3 - 5.5VDC
- Peak Current: 3.6A
- Current Limit: 2A (Configurable)
- Overcurrent protection
- 565mΩ Typical RDS(on) (high + low)
- 1 x Adafruit DRV8871 DC Motor Driver Breakout Board
- 2 x 3.5mm 2p Screw Terminal
- 1 x 6 Pin 2.54mm Pitch Header
May We Also Suggest…
TutorialProduct Tutorial: https://learn.adafruit.com/adafruit-drv8871-brushed-dc-motor-driver-breakout
This product has a 30 Day Warranty from the date of delivery. The item must not be modified, abused, incorrectly hooked up, or used for purposes outside the original scope of design.
This product is returnable Within 14 Days of delivery for a store credit. Item must be unopened, unused, and in re-saleable condition.
There are no comments yet.