Adafruit Feather M0 Adalogger

$31.95

Brand:

  • Adafruit
Availability: In Stock

The Feather M0 Adalogger is an all-in-one microcontroller, datalogger, and battery charger. The Adafruit designed board features a powerful processor, integrated battery charger, and microSD slot.

Available

SKU: MCR-034 Manufacturer: Adafruit Industries Mfg Part Number: 2796 Category: Tags: , , ,

Description

The Feather M0 Adalogger is an all-in-one microcontroller, datalogger, and battery charger. The Adafruit designed board features a powerful processor, integrated battery charger, and microSD slot. At the Feather M0’s heart is an ATSAMD21G18 ARM Cortex M0 processor, clocked at 48 MHz and at 3.3V logic. This chip has a whopping 256K of FLASH (8x more than the Atmega328 or 32u4) and 32K of RAM (16x as much)! This chip comes with built in USB so it has USB-to-Serial program & debug capability built in with no need for an FTDI-like chip.

To make it easy to use for portable projects, Adafruit has added a JST connector for their 3.7V Lithium polymer batteries and built in battery charging. The battery isnā€™t a requirement for using it, the board will run just fine straight from the micro USB connector or other external power sources. But, if you do have a battery, you can take it on the go, then plug in the USB to recharge. The Feather will automatically switch over to USB power when its available. To monitor the battery voltage, Adafruit has also tied the battery through a voltage divider to an analog pin, so you can measure and monitor the battery voltage to detect when you need a recharge.

For connecting your project there are 20 multi-function GPIO pins featuring:

  • 10 x Analog inputs (ADC)
  • 1 x 10 bit analog output (DAC)
  • 8 x PWM outputs – for servos, LEDs, etc
  • Red LED on Pin 13, Green LED on Pin 8

Features

  • Dimensions: 51 x 23 x 8mm (2 x 0.9 x 0.28)
  • ATSAMD21G18 @ 48MHz
  • 256KB of FLASH + 32KB of RAM
  • Hardware Serial, hardware I2C, hardware SPI support
  • Power/enable pin
  • 4 mounting holes
  • Weight: 5.3g
  • 3.3V logic and power
  • No EEPROM
  • 3.3V regulator with 500mA peak current output
  • USB bootloader and serial port debugging
  • Built in 100mA lipoly charger with charging status indicator LED
  • 20 x GPIO pins with multiple capabilities

Package Contents

  • 1 x Adafruit Feather M0 Adalogger
  • 2 x 16 Pin 2.54mm Pitch Header

May We Also Suggestā€¦

32GB Kingston MicroSD Card Class 10
Price: $25.95
 
USB A to Micro – 3ft
Price: $4.95
 
1.5′ USB A Male to Micro Cable
Price: $4.95
 
64GB Kingston MicroSD Card Class 10
Price: $31.95
 

   

  Difficulty Level

Soldering Skill: Beginner
Prototyping Skill: Beginner
Programming Skill: Beginner

  Product Certifications

  Product Attributes

Weight: 15 g

  Warranty Policy

This product has a 30 Day Warranty from the date of delivery. The item must not be modified, abused, incorrectly hooked up, or used for purposes outside the original scope of design.

  Return Policy

This product is returnable Within 14 Days of delivery for a store credit. Item must be unopened, unused, and in re-saleable condition.

 
More Information:
For more information on our Warranty and Return Policies, please consult our   Terms of Service
 

Comments

There are no comments yet.

Be the first to comment on “Adafruit Feather M0 Adalogger”

Your email address will not be published. Required fields are marked *