Adafruit HUZZAH32 – ESP32 Feather Board

$27.95

Adafruit HUZZAH32 – ESP32 Feather Board

$27.95

SKU: MCR-041 - Mfg Part Number: 3405

Description

The HUZZAH32 is an ESP32-based Feather, made with the official WROOM32 module. Adafruit has packed it with everything you love about Feathers: built in USB-to-Serial converter, automatic bootloader reset, Lithium Ion/Polymer charger, and just about all of the GPIOs brought out so you can use it with any of their Feather Wings.

That module nestled in at the end of this Feather contains a dual-core ESP32 chip, 4 MB of SPI Flash, tuned antenna, and all the passives you need to take advantage of this powerful new processor. The ESP32 has both WiFi and Bluetooth Classic/LE support. That means it’s perfect for just about any wireless or Internet-connected project.

The ESP32 is a perfect upgrade from the ESP8266 that has been so popular. In comparison, the ESP32 has way more GPIO, plenty of analog inputs, two analog outputs, multiple extra peripherals (like a spare UART), two cores so you don’t have to yield to the WiFi manager, much higher-speed processor, etc. etc!

Please note: The ESP32 is still targeted to developers. Not all of the peripherals are fully documented with example code, and there are some bugs still being found and fixed. Adafruit has got all of their Featherwings working under Arduino IDE, so you can expect things like I2C and SPI and analog reads to work. But other elements are still under development. For that reason, we recommend this Feather for makers who have some experience with microcontroller programming, and not as a first dev board.


Features

  • 240 MHz dual core Tensilica LX6 microcontroller with 600 DMIPS
  • Integrated 520 KB SRAM
  • On-board PCB antenna
  • 4 MByte flash include in the WROOM32 module
  • 10x capacitive touch interface
  • 3 x UARTs
  • 2 x I2C
  • 2 x I2S Audio
  • PWM/timer input/output available on every GPIO pin
  • SDIO master/slave 50 MHz
  • Integrated 802.11b/g/n HT40 Wi-Fi transceiver, baseband, stack and LWIP
  • Integrated dual mode Bluetooth (classic and BLE)
  • Ultra-low noise analog amplifier
  • Hall sensor
  • 32 kHz crystal oscillator
  • 3 x SPI
  • 12 x ADC input channels
  • 2 x DAC
  • OpenOCD debug interface with 32 kB TRAX buffer
  • SD-card interface support


Resources


Recommended Accessories

1.5′ USB A Male to Micro Cable
Price: $3.95
 
USB A to Micro – 3ft
Price: $4.95
 


   

Only 2 left in stock (can be backordered)

 
Share With:
google