Adafruit Mono 2.5W Class D Audio Amplifier – PAM8302

$6.95

Brand:

  • Adafruit
Availability: Temporarily Out Of Stock

This tiny mono amplifier breakout board by Adafruit is surprisingly powerful for its size. It is based on the PAM8302 chipset and is able to deliver up to 2.5 Watts into 4 ā€“ 8 Ohm impedance speakers. Inside the chip is a miniature class D controller that is able to run on 2 ā€“ 5.5VDC.

Out of Stock - Available on Backorder

Want to be notified when this product is back in stock?

SKU: BOB-106 Manufacturer: Adafruit Industries Mfg Part Number: 2130 Category: Tags: , , ,

Description

This tiny mono amplifier breakout board by Adafruit is surprisingly powerful for its size. It is based on the PAM8302 chipset and is able to deliver up to 2.5 Watts into 4 ā€“ 8 Ohm impedance speakers. Inside the chip is a miniature class D controller that is able to run on 2 ā€“ 5.5VDC. Since it is a class D, it is extremely efficient; when using an 8 Ohm speaker at half a Watt it will exceed 90% efficiency ā€“ making it an ideal choice for battery powered applications. The chipset also has built in thermal and over-current protection ā€“ an excellent upgrade over the LM386 amplifiers.

The A+ and A- inputs of the amplifier are run through 1.0uF capacitors, so they are fully differential. If you don’t have differential outputs, just tie the Audio- pin to ground. The output is “Bridge Tied” – that means the output pins connect directly to the speaker pins, no connection to ground. The output is a high frequency 250KHz square wave PWM that is then ‘averaged out’ by the speaker coil – the high frequencies are not heard. All the above means that you can’t connect the output into another amplifier, it should drive the speakers directly.

The board ships fully assembled and tested with a chunk of 2.54 mm breadboard pitch header (for using in a solderless breadboard) or a 3.5mm screw terminal for attaching the speaker.

Features

  • Input Voltage: 2 - 5.5VDC
  • Output Power: 2.5W at 4Ī©, 10% THD, 1.5W at 8Ī©, 10% THD, with 5.5V Supply
  • 50dB PSRR at 1KHz
  • Low current draw: 4mA quiescent and 1uA in shutdown mode
  • Dimensions: 15 x 24 x 2mm / 0.6 x 0.9 x 0.08\"
  • Fixed 24dB gain, onboard trim potentiometer for adjusting input volume.
  • Thermal and short-circuit/over-current protection
  • Ideal for battery based applications
  • Filterless design, with ferrite bead + capacitors on output.
  • Weight: 1.4g

Package Contents

  • 1 x Mono 2.5W Class D Audio Amplifier - PAM8302
  • 1 x 6 Pin 2.54mm Pitch Header
  • 1 x Screw Terminal

May We Also Suggestā€¦

3″ Speaker – 4 Ohm 3 Watt
Price: $4.95
 
8 Ohm 1 Watt – 30mm Speaker
Price: $1.95
 
8 Ohm 1 Watt – 40mm Speaker
Price: $1.95
 
8 Ohm 1 Watt – Long Speaker
Price: $2.95
 
Mini Speaker ā€“ 4 Ohm 3 Watt
Price: $4.95
 
Stereo 3.7W Class D Audio Amplifier – MAX98306
Price: $13.95
 

   

  Difficulty Level

Soldering Skill: Beginner
Prototyping Skill: Beginner
Programming Skill: N/A

  Product Certifications

  Product Attributes

Weight: 4 g

  Warranty Policy

This product has a 30 Day Warranty from the date of delivery. The item must not be modified, abused, incorrectly hooked up, or used for purposes outside the original scope of design.

  Return Policy

This product is returnable Within 14 Days of delivery for a store credit. Item must be unopened, unused, and in re-saleable condition.

 
More Information:
For more information on our Warranty and Return Policies, please consult our   Terms of Service
 

Comments

There are no comments yet.

Be the first to comment on “Adafruit Mono 2.5W Class D Audio Amplifier – PAM8302”

Your email address will not be published. Required fields are marked *