AM2315 – Encased Temperature / Humidity Sensor

$39.95

Availability: Low Stock - Only 1 Remaining

Looking for a nice enclosed temperature and humidity sensor? The AM2315 is effectively a DS18B20 temperature sensor and a capacitive humidity sensor in a nice enclosure.

Available

SKU: SEN-075 Manufacturer: AOSONG Mfg Part Number: AM2315 Categories: , Tags: , , , ,

Description

Looking for a nice enclosed temperature and humidity sensor? The AM2315 is effectively a DS18B20 temperature sensor and a capacitive humidity sensor in a nice enclosure. The enclosed sensors are much better suited to sensing in areas exposed to wind / rain / snow than a breakout board or bare sensor. A small microcontroller inside does the readings and provides a simple I2C interface for reading the finished & calibrated output data.

Simply connect the red wire to 5V power, black to ground, yellow wire to your i2c data pin, and the white wire to the i2c clock pin. You cannot change the i2c address so only one sensor can be used per i2c bus. Two 10Kohm pullup resistors are required for use, connect from the SDA and SCL lines to the power wire, the pullup resistors are not included with the sensor.

Features

  • 3.5 to 5.5V compatible
  • 0-100% humidity with 2% accuracy
  • 0.5 Hz update rate
  • Body: 98 x 16mm diameter (4 x 0.9\\\")
  • 10 mA max current use
  • -40 to 80°C with ±0.1°C typical accuracy
  • 4 wires 20 inches long
  • Uses I2C 7-bit address 05C

Package Contents

  • 1 x AM2315 - Encased Temperature / Humidity Sensor
  • 1 x Side Bracket
  • 1 x Vertical Bracket
  • 2 x Screws
  • 2 x Screw Anchors

May We Also Suggest…

1 Wire Temperature Sensor – DS18B20
Price: $4.95
 
10K Ohm Resistor – 1/6W
Price: $0.25
 
AM2302 Temperature/Humidity Sensor
Price: $15.95
 
BME280 Temperature Humidity Pressure Sensor
Price: $27.95
 
DHT22 Temperature / Humidity Sensor
Price: $9.95
 
HTU21D-F Temperature & Humidity Breakout Board
Price: $18.95
 

   

  Difficulty Level

Soldering Skill: N/A
Prototyping Skill: Beginner
Programming Skill: Beginner

  Product Certifications

  Product Attributes

Weight: 100 g

  Warranty Policy

This product has a 30 Day Warranty from the date of delivery. The item must not be modified, abused, incorrectly hooked up, or used for purposes outside the original scope of design.

  Return Policy

This product is returnable Within 14 Days of delivery for a store credit. Item must be unopened, unused, and in re-saleable condition.

 
More Information:
For more information on our Warranty and Return Policies, please consult our   Terms of Service
 

Comments

There are no comments yet.

Be the first to comment on “AM2315 – Encased Temperature / Humidity Sensor”

Your email address will not be published. Required fields are marked *