Deluxe Solder Sucker
This large solder sucker is an easy to use de-soldering tool primarily used to remove soldered through hole components from circuit boards.
A solder sucker or de-soldering pump is used to assist in removing through hole components from circuit boards. A solder sucker is always used in conjunction with a soldering iron and makes disassembly or repair a lot easier. This giant solder sucker will make short work of clearing out large amounts of solder. The tool can be easily cleaned and will save from consuming excessive amounts of solder wick while trying to remove components. These are a must have for any soldering tool kit or electronics workbench.
To use the solder sucker: lock the plunger in the down position, heat up the solder to be removed with your soldering iron, get the tip of the solder sucker as close as possible, and press the button! The molten solder is then sucked away, releasing your part. Once the part is removed, further cleanup can be done using Solder Wick.
- Easily disassembles for cleaning
- Removes large amounts of solder with ease
- A must have tool when soldering!
- 1 x Deluxe Solder Sucker
May We Also Suggest…
TutorialProduct Tutorial: http://learn.adafruit.com/adafruit-guide-excellent-soldering
This product has a 30 Day Warranty from the date of delivery. The item must not be modified, abused, incorrectly hooked up, or used for purposes outside the original scope of design.
This product is returnable Within 14 Days of delivery for a store credit. Item must be unopened, unused, and in re-saleable condition.
There are no comments yet.