Flow Sensor – FS300A – 3/4″

$16.95

Availability: In Stock

This 3/4″ sized flow sensor is used to measure liquid flow within a pipe and is ideally suited for monitoring water consumption in irrigation control systems, flow in cooling systems, and other areas where volume or the presence of water flow are monitored.

Available

SKU: SEN-171 Mfg Part Number: FS300A Category: Tags: , ,

Description

This type of flow sensor is used to measure liquid flow within a pipe and is ideally suited for monitoring water consumption in irrigation control systems, flow in cooling systems, and other areas where volume or the presence of water flow are monitored. Each side of the sensor has a G3/4″ connection and the sensor is connected by way of a 3 pin connector.

Inside the housing, a small pinwheel with an attached magnet is spun by passing water; as the magnet makes each revolution, a hall effect sensor inside the housing outputs a pulse on the yellow wire. Each pulse output represents approximately 3mL of fluid. The sensor is best suited to flow rates between 1 and 60 liters per minute ā€“ flow rates below one liter per minute tend not to register accurately.

For flow rates less than 6 liters per minute, we recommend looking at theĀ YF-S401Ā with a higher resolution / lower flow rate.

Features

  • Working Voltage: 3.5 to 24VDC
  • Working Flow Rate: 1 to 60 Liters/Minute
  • Maximum water pressure: 1.2 MPa
  • Working Temperature range: 1Ā°C to 80Ā°C

Package Contents

  • 1 x Flow Sensor - FS300A - 3/4Ė

May We Also Suggestā€¦

Brass Liquid Flow + Temperature Sensor
Price: $12.95
 
Liquid Flow Meter – YF-S201
Price: $12.95
 
Liquid Flow Meter – YF-S401
Price: $11.95
 

   

  Difficulty Level

Soldering Skill: N/A
Prototyping Skill: Beginner
Programming Skill: N/A

  Product Certifications

  Product Attributes

Weight: 100 g
Shipping Dimensions: 70 × 70 × 50 mm

  Warranty Policy

This product has a 30 Day Warranty from the date of delivery. The item must not be modified, abused, incorrectly hooked up, or used for purposes outside the original scope of design.

  Return Policy

This product is returnable Within 14 Days of delivery for a store credit. Item must be unopened, unused, and in re-saleable condition.

 
More Information:
For more information on our Warranty and Return Policies, please consult our   Terms of Service
 

Comments

There are no comments yet.

Be the first to comment on “Flow Sensor – FS300A – 3/4″”

Your email address will not be published. Required fields are marked *