Lithium Ion Cylindrical Battery – 3.7v 2200mAh

$21.95

Availability: Temporarily Out Of Stock

Need a big battery for your project? This lithium ion battery is rated at 2200mAh and has a protection circuit that provides over-voltage, under-voltage and over-current protection. Yet, it is slim and easy to fit into many project cases.

Out of Stock - Available on Backorder

Want to be notified when this product is back in stock?

SKU: BAT-015 Mfg Part Number: ICR18650 Category: Tags: , ,

Description

Need a big battery for your project? This lithium ion battery is rated at 2200mAh and has a protection circuit that provides over-voltage, under-voltage and over-current protection. Yet, it is slim and easy to fit into many project cases.

This cell can provide 2C of peak current (4400mA). Note that these Lithium Ion batteries are not designed to sustain such high loads, we suggest keeping any constant current draw under about 2A.

The batteries come pre-attached with a 2-pin JST-PH connector as shown and include the necessary protection circuitry. Because they have a high quality JST-or-compatible connector, the cable won’t snag or get stuck in a matching JST jack, they click in and out smoothly. The cables are rated for 2A so if you use them keep that in mind.

The included protection circuitry keeps the battery voltage from going too high (over-charging) or low (over-use) which means that the battery will cut-out when completely dead at 2.5V. However, even with this protection it is very important that you only use a LiIon/LiPoly constant-voltage/constant-current charger to recharge them and at a rate of 1A or less.

Like most lithium-ion packs, the batteries we sell do not have thermistors built in. This is why we suggest charging at 1/2C or even less – 1A max in this case. Of course, you can charge at a lower rate – it’ll just take a little longer to fill up.

Please Note: Due to shipping regulations for Lithium Batteries, there is now a limit of 4 Cells per order. For quantities greater than 4 cells, multiple shipments are required. Please contact us with any questions!

Features

  • Length: 69mm
  • Weight: 46g
  • Nominal Voltage: 3.7V
  • Max Charge Current: 1C / 2.2A
  • Standard Discharge Current: 0.5C / 1.1A
  • Cell Voltage: 3.7-3.9V
  • Diameter: 18mm
  • Nominal Capacity: 2200mAh ±2%
  • Standard Charge Current: ~0.2C / 0.5A
  • Charge Cut-Off Voltage: 4.2V
  • Discharge Cut-Off Voltage: 2.75V
  • Impedance: ≤35mΩ

Package Contents

  • 1 x Lithium Ion Cylindrical Battery - 3.7v 2200mAh

May We Also Suggest…

Lithium Ion Polymer Battery – 2500mAh
Price: $32.95
 
USB Li-Ion/Li-Po Charger
Price: $17.00
 
USB/ DC/ Solar LiPo Charger
Price: $27.95
 

   

  Difficulty Level

Soldering Skill: N/A
Prototyping Skill: Intermediate
Programming Skill: N/A

  Product Certifications

  Product Attributes

Weight: 60 g

  Warranty Policy

This product has a 30 Day Warranty from the date of delivery. The item must not be modified, abused, incorrectly hooked up, or used for purposes outside the original scope of design.

  Return Policy

This product is Final Sale and cannot be returned once purchased. 

More Information:
For more information on our Warranty and Return Policies, please consult our   Terms of Service
 

Comments

There are no comments yet.

Be the first to comment on “Lithium Ion Cylindrical Battery – 3.7v 2200mAh”

Your email address will not be published. Required fields are marked *