Panel Mount 2.1mm DC Barrel Jack
$2.95 $1.00
Available
Description
This panel mount DC Barrel Jack is great for getting power inside of an enclosure or case. These sockets are compatible with all 2.1mm power plugs, and can be mounted in panels up to 8mm (5/16″) thick!
This version of panel mount DC barrel jack is pushed into the hole from the front, so any wires attached to this connector will need to be pulled through the front of the panel and soldered to the solder tabs on the back of the connector. A small piece of heat shrink tubing over the joint will also help keep everything safe!
Features
- Drill Hole Diameter: 12mm
- Connector Size: 2.1 x 5.5mm DC Barrel
- Fits 2.1mm power plugs
- Overall Diameter: 14.1mm
- Depth Behind Panel: 16.3mm
- Overall Length: 18.5mm
Difficulty Level
Soldering Skill: | N/A |
---|---|
Prototyping Skill: | N/A |
Programming Skill: | N/A |
Product Certifications



Product Attributes
Weight: | 3 g |
---|
Warranty Policy
This product has a 30 Day Warranty from the date of delivery. The item must not be modified, abused, incorrectly hooked up, or used for purposes outside the original scope of design.
Return Policy
This product is returnable Within 14 Days of delivery for a store credit. Item must be unopened, unused, and in re-saleable condition.
Comments
There are no comments yet.