Panel Mount Inlet Socket with Lighted Switch – IEC320 C14
Looking to give your project that professional finish? For those times when you need to have a detachable way of supplying AC power to your project – this IEC320 C14 socket may be the answer. This version has a lighted power switch. The inlet has the same style of connector found on the back of most monitors, computer power supplies, HDTVs, and projectors – so it is likely you may even have a few extra cables laying around, and if not, we carry the mating 5-15P to IEC-C13 Cable as well!
The socket is designed to panel mount through a 48 x 27.25mm hole. 2 screw holes measuring 39.5mm center to center can be used to fasten it in place. On the back of the socket three large solderable tabs are labeled for Line, Neutral, and Protective Ground. The load runs directly through the integrated fuse holder. The lighted switch is not wired in by default and has all three SPDT contacts broken out; it can be connected as your requirements dictate. When connecting these components we recommend using heat shrink to minimize any areas of exposed high voltage.
The design of the fuse tray allows for it to be changed without access to the inside of the enclosure, and requires no tools. The fuse tray also has space for one spare fuse. These use a standard 5x20mm Fuse.
Please Note: Fuse not included
- Dimensions: 58.6 x 49.1 x 34.1mm
- Max Current: 15A
- Max Switch Current: 10A 125VAC / 6A 250VAC
- Cutout Size: 48 x 27.25mm
- Mounting Holes: 39mm (center to center)
- Behind Panel Depth: 28mm
- Max Voltage: 250VAC
- Integrated Fuse Holder
- Fuse Size: 5 x 20mm
May We Also Suggest…
This product has a 30 Day Warranty from the date of delivery. The item must not be modified, abused, incorrectly hooked up, or used for purposes outside the original scope of design.
This product is returnable Within 14 Days of delivery. Item must be unopened, unused, and in re-saleable condition.