Raspberry Pi Pico Starter Kit

$21.95

Raspberry Pi Pico Starter Kit

$21.95

SKU: RAS-199 - Mfg Part Number: RAS-199

Description

The Raspberry Pi Pico Starter Kit is a great way to get the Pico with all of the needed accessories to dive in to this new Microcontroller. The kit includes the Raspberry Pi Pico, a programming cable, the required breadboard compatible headers, a large solderless breadboard, and a bunch of different components to experiment with – 57 pieces in total!

What is the Pico? The Raspberry Pi Pico is a low-cost, high-performance microcontroller board with flexible digital interfaces. It feature the RP2040 which marks Raspberry Pi’s first microcontroller designed in-house. Pico provides minimal (yet flexible) external circuitry to support the RP2040 chip (Flash, crystal, power supplies and decoupling and USB connector). The majority of the RP2040 microcontroller pins are brought to the user IO pins on the left and right edge of the board. Four RP2040 IO are used for internal functions – driving an LED, on-board Switched Mode Power Supply (SMPS) power control and sensing the system voltages.

Pico uses an on-board buck-boost SMPS which is able to generate the required 3.3 volts (to power RP2040 and externalcircuitry) from a wide range of input voltages (~1.8 to 5.5V). This allows significant flexibility in powering the unit from various sources such as a single Lithium-Ion cell, or 3 AA cells in series. Battery chargers can also be very easily integrated with the Pico powerchain. Reprogramming the Pico’s flash memory can be done using USB (simply drag and drop a file onto the Pico which appears as a mass storage device) or via the Serial Wire Debug (SWD) port. The SWD port can also be used to interactively debug code running on the RP2040

Included Parts:
  • 1 x Raspberry Pi Pico
  • 1 x Large Solderless Breadboard
  • 2 x 40 Pin Breakaway Male Header – Standard
  • 1 x 1.5′ USB A Male to Micro Cable
  • 1 x 40pcs Premium Male/Male Jumper Wires
  • 1 x 10K Trim Pot
  • 1 x Passive Buzzer
  • 3 x Large Tactile Button
  • 5 x Yellow LED
  • 5 x Orange LED
  • 5 x Green LED
  • 5 x Blue LED
  • 5 x Red LED
  • 10 x 10K Resistor
  • 10 x 220 Ohm Resistor
  • 1 x CDS Photocell

  • Features

    • Includes Raspberry Pi Pico
    • 57 Piece Kit


    Resources


    In stock (can be backordered)

     
    Share With:
    google

    Additional information

    Weight 154 g

    Comments

    There are no comments yet, would you like to submit yours?

    Be the first to comment “Raspberry Pi Pico Starter Kit”

    *