Raspberry Pi Pico

$8.95

Availability: In Stock

The Raspberry Pi Pico is the first microcontroller developed by the Raspberry Pi Foundation. It features their own in-house designed chip, the RP2040. It is a low-cost, high performance controller designed with Python in mind. It is easy to use and features a full getting started guide care of the Pi Foundation.

Available

SKU: RAS-200 Manufacturer: Raspberry Pi Foundation Category: Tags: , , , , , ,

Description

The Raspberry Pi Pico is a low-cost, high-performance microcontroller board with flexible digital interfaces. It features the RP2040 which marks Raspberry Pi’s first microcontroller designed in-house. Pico provides minimal (yet flexible) external circuitry to support the RP2040 chip (Flash, crystal, power supplies and decoupling and USB connector). The majority of the RP2040 microcontroller pins are brought to the user IO pins on the left and right edge of the board. Four RP2040 IO are used for internal functions – driving an LED, on-board Switched Mode Power Supply (SMPS) power control and sensing the system voltages.

Pico uses an on-board buck-boost SMPS which is able to generate the required 3.3 volts (to power RP2040 and external circuitry) from a wide range of input voltages (~1.8 to 5.5V). This allows significant flexibility in powering the unit from various sources such as a single Lithium-Ion cell, or 3 AA cells in series. Battery chargers can also be very easily integrated with the Pico powerchain. Reprogramming the Pico’s flash memory can be done using USB (simply drag and drop a file onto the Pico which appears as a mass storage device) or via the Serial Wire Debug (SWD) port. The SWD port can also be used to interactively debug code running on the RP2040

Pico has been designed to use either soldered 0.1″ pin-headers (it is one 0.1″ pitch wider than a standard 40-pin DIP package) or can be used as a surface mountable “module”, as the user IO pins are also castellated. There are SMT pads underneath the USB connector and BOOTSEL button, which allow these signals to be accessed if used as a reflow-soldered SMT module.

Features

  • RP2040 microcontroller chip designed by Raspberry Pi
  • Flexible clock running up to 133 MHz
  • 264kB of SRAM
  • Low-power sleep and dormant modes
  • 26 multi-function GPIO pins
  • 16 x PWM Outputs
  • Accurate clock and timer on-chip
  • Accelerated floating point libraries on-chip
  • Dual-core ARM Cortex M0+ processor
  • 2MB of on-board Flash memory
  • USB 1.1 Host and Device support
  • Drag & drop programming using mass storage over USB
  • 3 x 12-bit Analog Input
  • 2Ɨ SPI, 2Ɨ I2C, 2Ɨ UART
  • Temperature sensor
  • 8 Ɨ Programmable IO (PIO) state machines for custom peripheral support

Package Contents

  • 1 x Raspberry Pi Pico

May We Also Suggestā€¦

1.5′ USB A Male to Micro Cable
Price: $4.95
 
40 Pin Breakaway Male Header – Standard
Price: $0.95
 
40 Pin Breakaway Male Header – White
Price: $0.95
 
Raspberry Pi Pico 1591B Proto Board
Price: $4.95
 
Raspberry Pi Pico Female Headers
Price: $1.95
 
USB A to Micro – 3ft
Price: $4.95
 

   

  Difficulty Level

Soldering Skill: Beginner
Prototyping Skill: Beginner
Programming Skill: Beginner

  Product Certifications

  Product Attributes

Weight: 8 g
Shipping Dimensions: 72 × 29 × 6 mm
PWM Outputs:

16

Input Voltage:

1.8 to 5.5 VDC

Logic Voltage:

3.3V

Pitch:

0.100", 2.54mm

Length:

52.5mm

Width:

21mm

Height:

3.7mm

  Warranty Policy

This product has a 30 Day Warranty from the date of delivery. The item must not be modified, abused, incorrectly hooked up, or used for purposes outside the original scope of design.

  Return Policy

This product is returnable Within 14 Days of delivery for a store credit. Item must be unopened, unused, and in re-saleable condition.

 
More Information:
For more information on our Warranty and Return Policies, please consult our   Terms of Service
 

Comments

There are no comments yet.

Be the first to comment on “Raspberry Pi Pico”

Your email address will not be published. Required fields are marked *