View cart “1.5′ USB A Male to Micro Cable” has been added to your cart.

Raspberry Pi Pico

$7.95

Raspberry Pi Pico

$7.95

SKU: RAS-200

Description

The Raspberry Pi Pico is a low-cost, high-performance microcontroller board with flexible digital interfaces. It feature the RP2040 which marks Raspberry Pi’s first microcontroller designed in-house. Pico provides minimal (yet flexible) external circuitry to support the RP2040 chip (Flash, crystal, power supplies and decoupling and USB connector). The majority of the RP2040 microcontroller pins are brought to the user IO pins on the left and right edge of the board. Four RP2040 IO are used for internal functions – driving an LED, on-board Switched Mode Power Supply (SMPS) power control and sensing the system voltages.

Pico uses an on-board buck-boost SMPS which is able to generate the required 3.3 volts (to power RP2040 and externalcircuitry) from a wide range of input voltages (~1.8 to 5.5V). This allows significant flexibility in powering the unit from various sources such as a single Lithium-Ion cell, or 3 AA cells in series. Battery chargers can also be very easily integrated with the Pico powerchain. Reprogramming the Pico’s flash memory can be done using USB (simply drag and drop a file onto the Pico which appears as a mass storage device) or via the Serial Wire Debug (SWD) port. The SWD port can also be used to interactively debug coderunning on the RP2040

Pico has been designed to use either soldered 0.1″ pin-headers (it is one 0.1″ pitch wider than a standard 40-pin DIP package) or can be used as a surface mountable “module”, as the user IO pins are also castellated. There are SMT pads underneath the USB connector and BOOTSEL button, which allow these signals to be accessed if used as a reflow-soldered SMT module.


Features

  • RP2040 microcontroller chip designed by Raspberry Pi
  • Flexible clock running up to 133 MHz
  • 264kB of SRAM
  • Low-power sleep and dormant modes
  • 26 multi-function GPIO pins
  • 16 x PWM Outputs
  • Accurate clock and timer on-chip
  • Accelerated floating point libraries on-chip
  • Dual-core ARM Cortex M0+ processor
  • 2MB of on-board Flash memory
  • USB 1.1 Host and Device support
  • Drag & drop programming using mass storage over USB
  • 3 x 12-bit Analog Input
  • 2× SPI, 2× I2C, 2× UART
  • Temperature sensor
  • 8 × Programmable IO (PIO) state machines for custom peripheral support


Resources


Recommended Accessories

1.5′ USB A Male to Micro Cable
Price: $3.95
 
40 Pin Breakaway Male Header – Standard
Price: $0.95
 
USB A to Micro – 3ft
Price: $4.95
 
40 Pin Breakaway Male Header – White
Price: $0.95
 


   

Back In Stock Notification

This item is currently out of stock, but is available for backorder. If you would like to reserve incoming stock, simply add this to your cart and checkout as per normal.

Alternativly, if you would like to be notified when this product is back in stock, simply subscribe to the auto-notification by entering your email address below.

Available on backorder

 
Share With:
google