Raspberry Pi WeatherHAT PRO

$34.95

Availability: Retired

Out Of Stock

SKU: RAS-184 Manufacturer: BC Robotics Inc. Mfg Part Number: RAS-184

Description

The Raspberry Pi WeatherHAT PRO is an easy way to get started monitoring the weather with the Raspberry Pi! This board is similar to our original Raspberry Pi Weather Board but features an integrated BME280 pressure / temperature / humidity sensor, so no need to add this on after the fact. It still features the same 4 channel AS1015 Analog to Digital Converter, DS18B20 Temperature Sensor (with onboard pull-up resistor), a spot to plug in a Servo motor, and RJ11 connection points for the SparkFun Weather Meters.

The 3 extra analog inputs are now routed to an easy to use 2.54mm/0.100” pitch header for connecting additional analog sensors. The integrated pullup resistors for these three inputs are now optionally connected via solder jumper. These extra analog inputs could be connected to a thermistor, soil moisture sensor, or even a simple CDS photo cell to provide additional data from your weather station!

The temperature and humidity readings of the BME280 are affected by their close proximity to the Raspberry Pi so we have added a 2 pin header for an external fan. Drawing in external air with a small fan will drastically improve your readings without exposing the sensor to the harsh elements (and keep your Pi running cooler). We recommend this 5V Brushless DC Cooling Fan and a JST XH 2 Pin Header.

Finally, we have also added an external input for regulated 5V power. If you are using an external regulator and need an easy way to feed power into the board and the Pi – add a two pin connector of your choice and you are good to go!

The board is also compatible with our Raspberry Pi Weather Station Tutorial and all 40 Pin GPIO versions of the Raspberry Pi. Raspberry Pi Sold Separately.

 

Features

  • Plug and play RJ11 connections for SparkFun Weather Meters
  • Plug and play for the DS18B20 Temperature Sensor
  • 3 x 12 Bit Analog Inputs
  • Servo motor plugin
  • Onboard BME280 Temperature / Pressure / Humidity sensor
  • Onboard 12-Bit ADS1015 ADC
  • I2C / SPI / UART broken out
  • Compatible with Pi A+, B+, Pi 2, Pi 3, Pi 3A+, Pi 3B+, Pi 4

 

Resources

Tutorials:
Pi Weather Station Tutorial (Part 1): https://bc-robotics.com/tutorials/raspberry-pi-weather-station-part-1/

 

May We Also Suggest…

GPIO Header for Raspberry Pi HAT
Price: $3.95
 
Raspberry Pi HAT Hardware
Price: $3.50
 
DS18B20 Digital Temperature Sensor
Price: $6.95
 
Terminal Block – 3-Pin 2.54mm
Price: $1.95
 
Weather Meters
Price: $139.95
 
JST XH 2 Pin Header
Price: $0.25
 
5V Brushless DC Cooling Fan – 40mm
Price: $3.95
 

   

  Difficulty Level

Soldering Skill: Beginner
Prototyping Skill: Beginner
Programming Skill: Beginner

  Product Certifications

  Product Attributes

Weight: 25 g

  Warranty Policy

This product has a 30 Day Warranty from the date of delivery. The item must not be modified, abused, incorrectly hooked up, or used for purposes outside the original scope of design.

  Return Policy

This product is Final Sale and cannot be returned once purchased. 

More Information:
For more information on our Warranty and Return Policies, please consult our   Terms of Service
 

Comments

There are no comments yet.

Be the first to comment on “Raspberry Pi WeatherHAT PRO”

Your email address will not be published. Required fields are marked *