Latching Solenoid Valve – Brass

$19.95

Availability: In Stock

Available

SKU: OTH-065 Category: Tag:

Description

Unlike most solenoid valves, This valve uses a latching solenoid – meaning there is no constant power draw when the valve is open. These are ideal for use when power draw or solenoid heating are a concern. Send a 30ms (min) pulse of 5V power down the line and it will latch open. Send a 30ms reversed polarity pulse down the line and it will latch closed. No constant power is required to hold the valve open or closed.

Like most solenoid valves of this type, there is a 3PSI minimum line pressure required to ensure the valve stays closed. The solenoid has ~16cm wires. +5VDC Pulse on the Red wire will open the valve, +5VDC on the Black wire will close the solenoid. We recommend driving this with a simple H-Bridge.

Please Note: These are not food safe or for use with chemicals.


Features

  • Coil Resistance: 10 Ohms
  • Working Temperature: 1 ℃ – 80 ℃
  • Pulse Length: 30ms
  • Dimensions: 68.5 x 25.3 x 44.6mm
  • Minimum Pressure: 3PSI
  • Coil Voltage: 5VDC
  • Thread: BSPP G1/2″
  • Actuating life: 300,000 cycles
  • Weight: 130g
  • Maximum Pressure: 145PSI


  Difficulty Level

Soldering Skill: N/A
Prototyping Skill: Beginner
Programming Skill: N/A

  Product Certifications

  Product Attributes

Weight: 150 g

  Warranty Policy

This product has a 30 Day Warranty from the date of delivery. The item must not be modified, abused, incorrectly hooked up, or used for purposes outside the original scope of design.

  Return Policy

This product is returnable Within 14 Days of delivery. Item must be unopened, unused, and in re-saleable condition.

 
More Information:
For more information on our Warranty and Return Policies, please consult our   Terms of Service
 

Reviews

There are no reviews yet.

Be the first to review “Latching Solenoid Valve – Brass”

Your email address will not be published. Required fields are marked *