The TB6612FNG Motor Driver can control up to two DC motors at a constant current of 1.2A (3.2A peak). Two input signals (IN1 and IN2) can be used to control the motor in one of four function modes: CW, CCW, short-brake and stop. The two motor outputs (A and B) can be separately controlled, and the speed of each motor is controlled via a PWM input signal with a frequency up to 100kHz. The STBY pin should be pulled high to take the motor out of standby mode.
Logic supply voltage (VCC) can be in the range of 2.7–5.5VDC, while the motor supply (VM) is limited to a maximum voltage of 15VDC. The output current is rated up to 1.2A per channel (or up to 3.2A for a short, single pulse).
The board comes with all components installed as shown. Decoupling capacitors are included on both supply lines. All pins of the TB6612FNG are broken out to two 0.1″ pitch headers; the pins are arranged such that input pins are on one side and output pins are on the other. Breadboard compatible!
- Motor Voltage (max): 15VDC
- Output Current (max): 3.2A
- Standby control to save power
- Built-in thermal shutdown circuit
- Breadboard compatible
- Logic Voltage: 2.7 – 5.5VDC
- Output Current (continous): 1.2A
- CW/CCW/short-brake/stop motor control modes
- Built-inlow-voltage detecting circuit
TB6612FNG Assembled: https://learn.sparkfun.com/tutorials/tb6612fng-hookup-guide
May We Also Suggest…
This product has a 30 Day Warranty from the date of delivery. The item must not be modified, abused, incorrectly hooked up, or used for purposes outside the original scope of design.
This product is returnable Within 14 Days of delivery. Item must be unopened, unused, and in re-saleable condition.