SparkFun Temperature Sensor – STTS22H (Qwiic)

$11.00

Brand:

  • SparkFun
Availability: In Stock

The SparkFun STTS22H Temperature Sensor is a Qwiic-enabled breakout board based on the ultralow-power, high-accuracy, STTS22H digital temperature sensor.

Available

SKU: SEN-175 Manufacturer: SparkFun Mfg Part Number: SEN-21262 Categories: , Tags: , , , , ,

Description

The SparkFun STTS22H Temperature Sensor is a Qwiic-enabled breakout board based on the ultralow-power, high-accuracy, STTS22H digital temperature sensor from ST Microelectronics. The breakout is in the Sparkfun standard Qwiic form factor and features two Qwiic connectors for easy chaining of multiple sensors. Thanks to its factory calibration the STTS22H offers high-end accuracy performance over the entire operating temperature range, reaching as low as Ā±0.5Ā°C without requiring any further calibration at the application level.

The sensor operating mode is user-configurable and allows selecting between different ODRs (down to 1Hz) or the one-shot mode for battery saving. In one-shot mode, the sensor current consumption falls to 1.75ĀµA. Peripheral addresses are also user-configurable and allow up to four different addresses to be specified by manipulating the jumpers on the back of the breakout. In addition, an interrupt pin is available to signal the application whenever the user-selectable high or low threshold has been exceeded.

Please Note: The breakout board has built-in 2.2kĪ© pullup resistors for I2C communications. If youā€™re hooking up multiple I2C devices on the same bus, you may want to disable these resistors.

Features

  • Uses I2C interface (Qwiic-enabled)
  • Four selectable addresses (0x3C (default), 0x3E, 0x38, 0x3F)
  • Operating temperature: -40Ā°C to +125Ā°C
  • Temperature accuracy (max): Ā± 0.5Ā°C (-10Ā°C to +60Ā°C)
  • Operating voltage: 1.5V to 3.6V (TypicallyĀ 3.3V if using the Qwiic cable)
  • Ultralow current: 1.75ĀµA in one-shot mode
  • Programmable thresholds with interrupt pin
  • Programmable operating modes (Freerun, one-shot, and Low-ODR)
  • NIST traceability

Package Contents

  • 1 x SparkFun Temperature Sensor - STTS22H (Qwiic)

May We Also Suggestā€¦

40 Pin Breakaway Male Header – Standard
Price: $0.95
 
Flexible Qwiic Cable – Breadboard Jumper 4 Pin
Price: $3.95
 
Qwiic / STEMMA QT Cable – 100mm
Price: $2.95
 
Qwiic / STEMMA QT Cable – 50mm
Price: $2.95
 
Qwiic / STEMMA QT Port Expander
Price: $7.95
 
SparkFun Digital Temperature Sensor Breakout – AS6212
Price: $13.95
 

   

  Difficulty Level

Soldering Skill: N/A
Prototyping Skill: Beginner
Programming Skill: Beginner

  Product Certifications

  Product Attributes

Weight: 5 g

  Warranty Policy

This product has a 30 Day Warranty from the date of delivery. The item must not be modified, abused, incorrectly hooked up, or used for purposes outside the original scope of design.

  Return Policy

This product is returnable Within 14 Days of delivery for a store credit. Item must be unopened, unused, and in re-saleable condition.

 
More Information:
For more information on our Warranty and Return Policies, please consult our   Terms of Service
 

Comments

There are no comments yet.

Be the first to comment on “SparkFun Temperature Sensor – STTS22H (Qwiic)”

Your email address will not be published. Required fields are marked *