Standard Servo – MG946R
The MG946R is a strong, dual bearing, servo motor featuring all metal gears. This servo can deliver up to 180oz-in of torque at 6V and achieves a rotational speed of 0.17 seconds per 60°.
The MG946R is a strong, dual bearing, servo motor featuring all metal gears. This servo can deliver up to 180oz-in of torque at 6V and achieves a rotational speed of 0.17 seconds per 60°. When the voltage is dropped to 4.8V, it still maintains 145oz-in of torque and 0.2 seconds per 60°.
The MG946R works with standard RC servo pulses, providing a running angle of approximately 180° over a servo pulse range of 600 µs to 2400 µs. The 25T spline is compatible with our Metal RC Servo Horn if the included parts don’t quite do it for you!
Please Note: This product has been updated to the MG946R from the MG945 as of June 2020.
- Speed @ 6V: 0.17 sec/60°
- Stall torque @ 6V: 13 kg·cm ( 180 oz-in )
- Lead length: 28cm (11\\\")
- Spline: 25 Tooth
- Max Voltage: 6.6 VDC
- Dimensions: 40.7 x 19.7 x 42.9mm
- Speed @ 4.8V: 0.20 sec/60°
- Stall torque @ 4.8V: 10.5 kg·cm (145 oz-in)
- Weight: 67g
- Range: 180° (600µs to 2400µs)
- Max Current Draw: 1.2A @ 6 VDC
- 1 x Standard Servo - MG946R
- 1 x Servo Accessory Pack (Horns, Screws)
May We Also Suggest…
TutorialProduct Tutorial: http://learn.adafruit.com/adafruit-arduino-lesson-14-servo-motors
This product has a 30 Day Warranty from the date of delivery. The item must not be modified, abused, incorrectly hooked up, or used for purposes outside the original scope of design.
This product is returnable Within 14 Days of delivery for a store credit. Item must be unopened, unused, and in re-saleable condition.
There are no comments yet.