Terminal Block – 3-pin 5.0mm
These high-quality terminal blocks / screw terminals are typically used to connect loose wire to circuit boards. The terminals will fit 16 – 30 AWG wires and have a rating of 300V / 13.5A per contact.
These high-quality terminal blocks / screw terminals are typically used to connect loose wire to circuit boards. Simply turn the screw to open the jaw, insert the wire, and tighten the screw to close the jaw and clamp the wire in place.
These specific terminals work with wires ranging from 30 – 16AWG and have alignment pins on each end that allow them to lock together to form larger configurations. The pitch measures 5.00mm, however it is close enough that in smaller lengths these can be used in most breadboard pitch perfboards as they will hit every second pin. It should be noted that these pins are thicker and may need to be shaved down to fit in some perfboards.
- 5.0mm pitch
- Wire gauge: 30-16 AWG
- Voltage rating: 300 V
- Current rating: 13.5 A
- Flammability Rating: UL 94 V-0
- Housing Material: Polyamide (PA)
- Contact Plating: Tin
- Contact Material: Brass
- 1 x Terminal Block - 3-pin 5.0mm
May We Also Suggest…
DatasheetProduct Datasheet: https://bc-robotics.com/datasheets/te-screw-terminals.pdf
This product has a 30 Day Warranty from the date of delivery. The item must not be modified, abused, incorrectly hooked up, or used for purposes outside the original scope of design.
This product is returnable Within 14 Days of delivery for a store credit. Item must be unopened, unused, and in re-saleable condition.
There are no comments yet.