Description
Great for any haptic feedback project! These vibration motors are completely sealed discs and are very easy to use. Two wires are used to control/power the vibe. Simply provide power from a battery or microcontroller pin (red is positive, blue is negative) and it will buzz away. Works from 2V up to 5V, higher voltages result in more current draw but also a stronger vibration. If you want to reduce the current draw/strength (for example, to control it directly from an Arduino pin) try putting a resistor (100 to 1000 ohms) in series.
Features
- 2 – 5 VDC
- 11000 RPM at 5V
- Diameter: 10mm
- Completely sealed
- 5V current draw: 100mA / 2V current draw: 40mA
- Thickness: 3.3mm
May We Also Suggest…
Warranty Policy
This product has a 30 Day Warranty from the date of delivery. The item must not be modified, abused, incorrectly hooked up, or used for purposes outside the original scope of design.
Return Policy
This product is returnable Within 14 Days of delivery for a store credit. Item must be unopened, unused, and in re-saleable condition.
Comments
There are no comments yet.