5mm Blue LED – Basic
This basic blue LED is not too bright, and ideal for prototyping and experimenting on a breadboard or as an indicator LED in a control panel. The LED is a 5mm / T1 3/4 and has a semi-transparent finish. To use this LED you will need a current limiting resistor; this will vary depending on your input voltage. Typically with a 5V supply we recommend a 100 ohm resistor for a single LED.
These fit our Metal 5mm LED Holders best – our Plastic 5mm LED Holders fit, but due to a slight difference in diameter, these would require a little adhesive to keep them in place.
- Color: Blue
- Current Draw: 20mA
- Forward Voltage: 3.2V
- Size: 5mm – T1 3/4
How to power an LED: https://bc-robotics.com/tutorials/how-to-power-an-led/
This product has a 30 Day Warranty from the date of delivery. The item must not be modified, abused, incorrectly hooked up, or used for purposes outside the original scope of design.
This product is returnable Within 14 Days of delivery for a store credit. Item must be unopened, unused, and in re-saleable condition.
There are no comments yet.