-
Lithium Ion Polymer Battery – 2500mAh
$32.95This 2500mAh and 3.7V Lithium Polymer (LiPo) battery features a 2 pin JST connector and feature protection circuitry to ensure the battery voltage does not… -
Potentiometer Knob – Soft Touch T18 – Red
$1.50Light PacketThis soft touch T18 knob works great with a number of potentiometers in the shop. The knob is designed to sit directly on the knurled… -
10mm Blue LED
$0.50Light PacketThis huge diffused 10mm Blue LED is really bright so it can be seen in daytime, and from any angle. They go easily into a… -
Cable Gland – PG-7
$2.95 -
Waterproof Polarized 4-Wire Cable Set
$4.95These IP67 rated cable sets are ideal for projects that are exposed to the weather and feature a silicone gasket and threaded cover to ensure… -
White LED Backlight Module – Large
$4.95Light PacketLED backlights are a very unique type of LED. These LEDs are embedded in a special light diffusing plastic, which gives them a nice even… -
USB to TTL Serial Cable
$12.95When working with microcontrollers, single board computers, serial based sensors, or console ports TTL Serial is a must. This simple USB to TTL Serial cable… -
Raspberry Pi Tall Header
$3.95Light PacketThis extra tall header is compatible with all 40 pin GPIO headers found on the Raspberry Pi A+, Pi B+, Pi 2, Pi 3B, Pi… -
Potentiometer Knob – Soft Touch T18 – Blue
$1.50Light PacketThis soft touch T18 knob works great with a number of potentiometers in the shop. The knob is designed to sit directly on the knurled… -
Micro Servo – MG90S
$7.95Add more power to your robot with this metal-geared servo. The tiny little servo can rotate approximately 180 degrees (90 in each direction), and works… -
Lithium Ion Cylindrical Battery – 3.7v 2200mAh
$21.95Need a big battery for your project? This lithium ion battery is rated at 2200mAh and has a protection circuit that provides over-voltage, under-voltage and… -
Lithium Ion Polymer Battery – 1200mAh
$21.95This 1200mAh and 3.7V Lithium Polymer (LiPo) battery features a 2 pin JST connector and feature protection circuitry to ensure the battery voltage does not… -
-
MCP9808 High Accuracy Temperature Sensor
$7.95Light PacketWith a typical accuracy of ±0.25°C over the sensor's -40°C to +125°C range and a resolution of 0.0625°C the MXP9808 is extremely precise! The board… -
AM2302 Temperature/Humidity Sensor
$15.95The AM2302 is a great weather sensor package. This uses 1 digital input to the microcontroller and provides temperature accurate to +/- 0.5°C and humidity… -
Adafruit Feather HUZZAH with ESP8266 WiFi
$23.95Light PacketThe Adafruit Feather HUZZAH ESP8266 is Adafruit's take on an 'all-in-one' ESP8266 WiFi development board with built in USB and battery charging. It's an ESP8266… -
-
Small Reduction Stepper Motor – 5VDC
$4.95This geared stepper is a great first motor for experimenting with and the built in mounting plate makes this unit easy to mount. The 1/64… -
INA169 Analog DC Current Sensor
$14.95Light PacketThe INA169 will handle voltages of up to 60VDC and continuous current flow of up to 5A. Simply put this in line with the power… -
Thermocouple Amplifier MAX31855 Breakout Board
$22.95Light PacketThe Adafruit MAX31855K breakout is an easy to use amplifier primarily designed for use with thermocouples. This board is compatible with all of our K-type… -
Qwiic / STEMMA QT Cable – 100mm
$2.95Light PacketThis Qwiic / STEMMA QT cable measures 100mm long and is ideal for areas where devices are close to one another.