-
Terminal Block – 2-pin 5.0mm
$1.25Light PacketThese high-quality terminal blocks / screw terminals are typically used to connect loose wire to circuit boards. The terminals will fit 16 – 30 AWG… -
-
White LED Backlight Module – Medium
$3.95Light PacketLED backlights are a very unique type of LED. These LEDs are embedded in a special light diffusing plastic, which gives them a nice even… -
-
-
Raspberry Pi Pico
$8.95Light PacketThe Raspberry Pi Pico is the first microcontroller developed by the Raspberry Pi Foundation. It features their own in-house designed chip, the RP2040. It is… -
10 Pin Arduino Stacking Header
$0.25Light PacketStacking headers are a type of breadboard pitch female connector with extended male pins on the bottom. These extended male pins are compatible with the… -
5mm Ultraviolet LED (400nm)
$0.95Light PacketThis Ultraviolet (400nm) 5mm LED emits UV “blacklight” and work well with florescent materials that react to blacklight. -
Ceramic Screwdriver – Flat 2.0mm YR-034D
$2.95Light PacketThis Flat 2.0mm Ceramic Screwdriver is extremely useful to have around the workbench. These are specifically designed for tuning and adjusting electrically sensitive equipment as… -
-
555 Timer
$1.95Light PacketThe 555 timer is a staple of beginner electronic circuits. It is a precision timer circuit capable of creating an accurate time delay or oscillation… -
Prototype Board – 3x7cm
$1.95Light PacketThis small prototype board is 30 x 70mm and uses a standard 0.100" spacing. The grid is 10 x 25 holes, meaning there are 250… -
-
-
Terminal Block – 2-Pin 3.5mm
$1.25Light PacketThese high quality 3.50mm (~0.137") Terminal blocks are a great way to make semi permanent connections between PCB and loose wiring. The terminals will fit… -
-
-
CR2032 Coin Cell Holder – Breadboard Compatible
Original price was: $0.95.$0.50Current price is: $0.50.Light PacketSaleThis battery holder is designed to fit CR2032 coin cell batteries (the same ones found in many automotive key fobs and other devices) and fits… -
Prototype Board – 2x8cm
$1.50Light PacketThis thin prototype board is 20 x 80mm and uses a standard 0.100" spacing. The grid is 6 x 28 holes, meaning there are 168… -
-
Shield Stacking Headers for R3 Arduino
$3.95Light PacketThis set of Arduino Shield Stacking Headers can be used to stack multiple boards (shields) on top of an Arduino or compatible microcontroller. -
-
Premium Male/Male Jumper Wires – 3″
$3.95Light PacketThese pre-terminated ribbon cables are great for making basic wire harnesses or prototyping between breadboards, sensors, microcontrollers, and other electronic parts. The cable is just…