Raspberry Pi Pico WH
$14.95
The Raspberry Pi Pico WH is a no-soldering-required version of the WIFI-equipped Raspberry Pi Pico W. It features pre-soldered breadboard compatible headers, making this ready to use right out of the package.
Please Note: Limit 1 Per Customer
Available
Description
30The Raspberry Pi Pico WH is a no-soldering-required version of the WIFI-equipped Raspberry Pi Pico W. It features pre-soldered breadboard compatible headers, making this ready to use right out of the package. Pico WH provides minimal (yet flexible) external circuitry to support the RP2040 chip (Flash, crystal, power supplies and decoupling and USB connector). WiFi is enabled via the use of an Infineon CYW43439 wireless chip. The CYW43439 supports IEEE 802.11 b/g/n wireless LAN, and Bluetooth 5.2. The majority of the RP2040 microcontroller pins are brought to the user IO pins on the left and right edge of the board. Four RP2040 IO are used for internal functions – driving an LED, on-board Switched Mode Power Supply (SMPS) power control and sensing the system voltages.
Pico uses an on-board buck-boost SMPS which is able to generate the required 3.3 volts (to power RP2040 and external circuitry) from a wide range of input voltages (~1.8 to 5.5V). This allows significant flexibility in powering the unit from various sources such as a single Lithium-Ion cell, or 3 AA cells in series. Battery chargers can also be very easily integrated with the Pico powerchain. Reprogramming the Pico’s flash memory can be done using USB (simply drag and drop a file onto the Pico which appears as a mass storage device) or via the Serial Wire Debug (SWD) port. The SWD port can also be used to interactively debug code running on the RP2040.
The Pico WH has pre-soldered 0.1″ pin-headers and will slot right into a breadboard (it is one 0.1″ pitch wider than a standard 40-pin DIP package).
Features
- RP2040 microcontroller chip designed by Raspberry Pi
- CYW43439 wireless chip
- 802.11 b/g/n wireless LAN
- Bluetooth 5.2
- Flexible clock running up to 133 MHz
- 264kB of SRAM
- Low-power sleep and dormant modes
- 26 multi-function GPIO pins
- 16 x PWM Outputs
- Accurate clock and timer on-chip
- Accelerated floating point libraries on-chip
- Dual-core ARM Cortex M0+ processor
- 2MB of on-board Flash memory
- USB 1.1 Host and Device support
- Drag & drop programming using mass storage over USB
- 3 x 12-bit Analog Input
- 2× SPI, 2× I2C, 2× UART
- Temperature sensor
- 8 × Programmable IO (PIO) state machines for custom peripheral support
- No soldering required!
Package Contents
- 1 x Raspberry Pi Pico WH
May We Also Suggest…
Tutorial
Product Tutorial: http://www.raspberrypi.org/documentation/pico/getting-startedOnline Guide
Online Guide: https://learn.adafruit.com/getting-started-with-raspberry-pi-pico-circuitpythonWarranty Policy
This product has a 30 Day Warranty from the date of delivery. The item must not be modified, abused, incorrectly hooked up, or used for purposes outside the original scope of design.
Return Policy
This product is returnable Within 14 Days of delivery for a store credit. Item must be unopened, unused, and in re-saleable condition.
Comments
There are no comments yet.