SparkFun Electronics is supplier of electronic kits and components based just outside Boulder Colorado. They were founded in 2003 with the idea that electronics should be more accessible to the average person. Since then, they have grown to become a leader in Do-It-Yourself electronics and open source technology. We have been a supplier of SparkFun in Canada since 2015 and continue to expand our collection of their fine products!
SparkFun products in our shop:
-
Mini Solder Tube – 63/37 Leaded – 15g
$5.95This tube of solder is just the right size to keep in a toolkit. The solder is leaded 63/37 (63% tin, 37% lead) and features… -
Ribbon Crimp Connector – 6-pin (2×3, Female)
$0.50Light PacketThese 6-pin IDC (ribbon crimp connectors) can be snapped onto 6-wire ribbon cable to make your own cable assemblies and keep your connections organized. -
-
SparkFun Inventor’s Kit – v4.1.2
$149.95The SparkFun Inventor's Kit (SIK) is a great way to get started with programming and hardware interaction with the Arduino programming language. The SIK includes… -
SparkFun Soil Moisture Sensor
$8.95Light PacketThe SparkFun Soil Moisture Sensor is a simple device designed to measure the moisture content of soil. It uses a very basic resistive sensing principle,… -
4 Channel Logic Level Converter – Bi-Directional
$4.95Light PacketThe SparkFun bi-directional logic level converter is a small device that safely steps down 5V signals to 3.3V AND steps up 3.3V to 5V at… -
Flexible Coolant Pipe – 1ft
$3.95What are flexible coolant pipes doing in our catalogue? Well, these are actually used with the SparkFun Third Hand Kit. When alligator clip ends are… -
Alligator Clip
$0.95Light PacketThis high quality alligator clip is perfect for building your own custom alligator cables. The clip will accept up to 16AWG wire (or 14AWG if… -
SparkFun RedBoard
$27.50SaleThe SparkFun RedBoard is an Arduino compatible board; for all intents and purposes it is an Arduino Uno with a few improvements. It combines the… -
Blower – Squirrel Cage (12V)
$11.95This DC Blower Fan really moves some air! Pulling about 1Amp @ 12VDC, this blower is rated at 16CFM and has a 33mm outlet. -
Chip Quik No-Clean Flux Pen – 10mL
$15.95This No-Clean flux pen is perfect for all of your soldering, de-soldering, rework, and reflow purposes! Compatible with Lead and Lead-Free solders, this is a… -
Pan/Tilt Bracket Kit
$12.95This specific Pan and tilt kit includes two servos and all of the hardware required to build a basic movable platform for mounting cameras, sensors,… -
-
Weather Meters
$139.95This package of sensors specifically focuses on wind and rain. The kit includes an anemometer to measure wind speed, a wind vane to measure wind… -
-
SparkFun Inventor’s Kit for micro:bit v2
$99.95The SparkFun Inventor’s Kit v2 (SIK) for micro:bit is a great way to get creative, connected and coding with the micro:bit v2. The SIK for… -
Heat Sink Compound
$4.95This heat sink compound is composed of 50% silicone, 20% carbon, and 30% metal oxide. It has a thermal conductivity of 1.172 W/(mK), which should… -
Load Sensor – 50kg
$5.95Light PacketThis load sensor can measure up to 50kg / 110 lbs and is the same type commonly found in digital bathroom scales -
-
SparkFun micro:bot Kit – v2.0
$139.95Is there a better way to learn electronics and learn to code than with a robot kit? Probably not – robots are great! The SparkFun… -
Flexible Qwiic Cable – Breadboard Jumper 4 Pin
$3.95Light PacketThis 4-wire cable is a little over 150mm / 6" long and fitted with JST-SH female 4-pin connectors on one end and premium Dupont male… -
30W 110V Soldering Iron – Basic
$22.95This is a very basic fixed temp, quick heating, 30W 110/120 VAC soldering iron. We really enjoy using the more expensive irons, but if you… -
Load Cell – 10kg, Straight Bar (TAL220)
$9.95Light PacketThis straight bar load cell (sometimes called a strain gauge) can translate up to 10kg of pressure (force) into an electrical signal. -
IC Hook with Pigtail – 5 Pack
$8.00Light PacketSaleHave you ever needed to test an IC after it is soldered in place? This set of 5 cables have an IC Hook / Grabber… -
SparkFun Basic Multimeter
$23.95The digital multimeter (DMM) is an essential tool in every electronic enthusiasts arsenal. The SparkFun Digital Multimeter, however, is not your average multimeter, it features… -
Multimeter Probes – Tweezers
$7.95These tweezer probes connect to your existing instrumentation with shrouded banana connectors and allow you to easily test small parts with one hand. The large… -
Qwiic / STEMMA QT Cable – 50mm
$2.95Light PacketThis Qwiic / STEMMA QT cable measures 50mm long and is ideal for areas where devices are close to one another.