5V 30A SPST Relay
This relay is a SPST-NO (single pole – single throw – normally open) with a contact rating of up to 30A. Typically these will be used in a special footprint on a circuit board (such as our Large Relay Breakout), but they can be made to fit into perfboards with a little creativity. The coil voltage is 5VDC, so applying ~5V across the coil pins will change the contact position of the relay. The contacts can handle a maximum of 30A and voltages up to 277VAC / 28VDC.
- Contact Rating: 30A
- Max Voltage: 277VAC / 28VDC
- Coil Voltage: 5VDC
- Coil Current: 200mA
- Turn On Voltage (Max): 3.75VDC
- Contact Form: 1 Form A
- Coil Resistance: 25 Ohms
- Single Pole Double Throw (SPST-NO)
- Fully Sealed
- Non Latching
- Turn Off Voltage (Min): 0.5VDC
30A Relay: http://www.bc-robotics.com/datasheets/T9A-Relay.pdf
May We Also Suggest…
This product has a 30 Day Warranty from the date of delivery. The item must not be modified, abused, incorrectly hooked up, or used for purposes outside the original scope of design.
This product is Final Sale and cannot be returned once purchased.
There are no comments yet.