12-24V Small Solenoid – 10mm Throw
This solenoid is fairly small, with a 30.5mm long body and a ‘captive’ armature. It operates between 12-24V with a 10mm throw and a return spring.
Solenoids are basically electromagnets: they are made of a coil of copper wire with an armature (a slug of metal) in the middle. When the coil is energized, the slug is pulled into the center of the coil.
This solenoid is fairly small, with a 30.5mm long body and a ‘captive’ armature with a return spring. This solenoid is rated for 12-24V but we would recommend only momentary operation at higher voltages due to the heat generated. Ideally, around 15V is best – providing a good combination of strength without too much heat. When voltage is applied the solenoid moves and when voltage is removed the solenoid springs back to its original position. There are two M3 mounting holes on the chassis of the solenoid making mounting easy!
- Voltage: 12-24V
- Current Draw: 0.4A (12V), 0.8A (24V)
- Coil Resistance: 29 Ohms
- Weight: 32 grams
- Body Dimensions: 30.5 x 15.5 x 15.5mm
- Wire Length: 170mm
- Push or pull type with 10 mm throw
- 5 Newton starting force (24V)
- 2 x M3 Mounting Holes
- 1 x 24V Solenoid - 10mm Throw
May We Also Suggest…
This product has a 30 Day Warranty from the date of delivery. The item must not be modified, abused, incorrectly hooked up, or used for purposes outside the original scope of design.
This product is returnable Within 14 Days of delivery. Item must be unopened, unused, and in re-saleable condition.